48V 500W WS55-220 Brushless Spindle BLDC Motor Driver Controller MACH3 Speed Analog
Product Description:
- WS55-220 brushless DC motor controller is commonly used in 24V, 36V, 48V third voltage ranging from 20V to 50V that the motor can work normally. Compatible square wave includes Holzer and no Holzer. It has potentiometer speed control function, external 10V voltage speed regulation function, switch machine function, speed output function, alarm output function, positive and negative reverse function, etc.It has protective shell.
- Widely used in small equipment, power tools, pumps, fans control system, etc.
Have:
L compatible with Holzer and no Holzer
L start to stop
L external potentiometer control/external voltage control
L lnertia stop
L owe overvoltage protection
L current limiting
L over-current protection
L locked-rotor protection
L the alarm signal output
L speed signal output
L compatible with and without hall hall
Controller Performance Parameters:
- The rated voltage:20 to 50 VDC
- Rated current:WS55-220:12 a
- Current limiting:15 a
- Maximum speed:Support speed 20000RPM or more, the specific speed depends on the motor itself and load.
- Two modes of speed regulation:
1.external potentiometer: through this potentiometer speed regulation;
2.external voltage: external 10VDC voltage speed regulation;
Note: The two speed regulation can not be used simultaneously;
- Speed output:PG signal: There is a 5v-revolution pulse output between the port and the ground.
The output frequency is set to P (Hz), the motor class logarithm is N, and the speed is F (RPM), then the output speed frequency is P=F*N/60;
Alarm output:ALM signal:There is an 5v alarm pulse output between the port and the ground.
Positive inversion function:F/R:Fiddle the toggle switch on the corresponding side, the motor steering direction can be changed. For the toggle switch, the white part is up and down, then twang it up and down. For the toggle switch, the white part is horizontal, and the twang horizontally.
- Start-stop:Two control modes:
1.External switch EN: Transfer through switch;
2.Side toggle switch EN: for the toggle switch, the white part is up and down, then down for the start; for the toggle switch, the white part is horizontal, then dial to start
- Remark: You can only turn one control at the same time, one of the switches is closed, and the other one is valid
- Blocking protection:If the motor stops working ,switch on the power again to start.
- Power light:Green light: power on and off
- Status light:Red light: two flashes in standby time, after starting, extinguish. Blink when fault occurs
- Insulation resistance:>100M at ambient temperature and atmospheric pressure
- Insulation strength:At normal temperature and pressure, 0.5KV, 1 minutes
Usage environment and parameters:
- Storage temperature:-20℃~+65℃
- Usage environment:occasion:Avoid direct contact with dust, fumes and corrosive gases
- Temperature:0-45 DEG C
- Humidity:< 80%, no frost, frost free
- Shock:5.9m/S2 MAX
- Storage humidity:0~95%RH
- Volume:96mm (long) *67mm (wide, including terminal block) *37mm (high)
- Weight:195g (with potentiometer and switch)
- Terminal connection mode:Potentiometer speed control connection mode;External 10V speed control connection mode
Package List:
- 1 x 48V 500W WS55-220 Brushless Spindle BLDC Motor Driver Controller
- 1 x Connection wire
Product Description:
- WS55-220 brushless DC motor controller is commonly used in 24V, 36V, 48V third voltage ranging from 20V to 50V that the motor can work normally. Compatible square wave includes Holzer and no Holzer. It has potentiometer speed control function, external 10V voltage speed regulation function, switch machine function, speed output function, alarm output function, positive and negative reverse function, etc.It has protective shell.
- Widely used in small equipment, power tools, pumps, fans control system, etc.
Have:
L compatible with Holzer and no Holzer
L start to stop
L external potentiometer control/external voltage control
L lnertia stop
L owe overvoltage protection
L current limiting
L over-current protection
L locked-rotor protection
L the alarm signal output
L speed signal output
L compatible with and without hall hall
Controller Performance Parameters:
- The rated voltage:20 to 50 VDC
- Rated current:WS55-220:12 a
- Current limiting:15 a
- Maximum speed:Support speed 20000RPM or more, the specific speed depends on the motor itself and load.
- Two modes of speed regulation:
1.external potentiometer: through this potentiometer speed regulation;
2.external voltage: external 10VDC voltage speed regulation;
Note: The two speed regulation can not be used simultaneously;
- Speed output:PG signal: There is a 5v-revolution pulse output between the port and the ground.
The output frequency is set to P (Hz), the motor class logarithm is N, and the speed is F (RPM), then the output speed frequency is P=F*N/60;
Alarm output:ALM signal:There is an 5v alarm pulse output between the port and the ground.
Positive inversion function:F/R:Fiddle the toggle switch on the corresponding side, the motor steering direction can be changed. For the toggle switch, the white part is up and down, then twang it up and down. For the toggle switch, the white part is horizontal, and the twang horizontally.
- Start-stop:Two control modes:
1.External switch EN: Transfer through switch;
2.Side toggle switch EN: for the toggle switch, the white part is up and down, then down for the start; for the toggle switch, the white part is horizontal, then dial to start
- Remark: You can only turn one control at the same time, one of the switches is closed, and the other one is valid
- Blocking protection:If the motor stops working ,switch on the power again to start.
- Power light:Green light: power on and off
- Status light:Red light: two flashes in standby time, after starting, extinguish. Blink when fault occurs
- Insulation resistance:>100M at ambient temperature and atmospheric pressure
- Insulation strength:At normal temperature and pressure, 0.5KV, 1 minutes
Usage environment and parameters:
- Storage temperature:-20℃~+65℃
- Usage environment:occasion:Avoid direct contact with dust, fumes and corrosive gases
- Temperature:0-45 DEG C
- Humidity:< 80%, no frost, frost free
- Shock:5.9m/S2 MAX
- Storage humidity:0~95%RH
- Volume:96mm (long) *67mm (wide, including terminal block) *37mm (high)
- Weight:195g (with potentiometer and switch)
- Terminal connection mode:Potentiometer speed control connection mode;External 10V speed control connection mode
Package List:
- 1 x 48V 500W WS55-220 Brushless Spindle BLDC Motor Driver Controller
- 1 x Connection wire
Payment Terms:
1. We only accept paypal payment, other payment methods are not acceptable.
2. Payment should be completed within 7 days of bid or auction closing. Or unpaid dispute will be filed for non-payer after 7 days of sales day.
Shipping Terms:
1. We ship all the items to your paypal address, please make sure that your paypal address must be correct or send us a message to inform us if you want to change a address before you pay for it.
2. We ship all our buyers packages with tracking number, and all the items will be sent within 1-2 business days after payment received.
3. Usual we offer free shipping by EUB or Paypal package, but if you would like a express delivery, we can ship your package by International EMS or DHL on the condition that you are willing to pay for the extra postage.
4. All the package which weight is over 2kg, we will ship it by International EMS or DHL as other methods can not ship to, and it commonly takes 5-10 business days to arrive you.
Return Terms:
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes:
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback:
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
1. We only accept paypal payment, other payment methods are not acceptable.
2. Payment should be completed within 7 days of bid or auction closing. Or unpaid dispute will be filed for non-payer after 7 days of sales day.
Shipping Terms:
1. We ship all the items to your paypal address, please make sure that your paypal address must be correct or send us a message to inform us if you want to change a address before you pay for it.
2. We ship all our buyers packages with tracking number, and all the items will be sent within 1-2 business days after payment received.
3. Usual we offer free shipping by EUB or Paypal package, but if you would like a express delivery, we can ship your package by International EMS or DHL on the condition that you are willing to pay for the extra postage.
4. All the package which weight is over 2kg, we will ship it by International EMS or DHL as other methods can not ship to, and it commonly takes 5-10 business days to arrive you.
| Delivery Time | Countries |
| 7 ~ 15 days | United States (ship by International EUB) |
| 7 ~ 15 days | United Kingdom, Canada, Australia ( ship by Paypal Package) |
Return Terms:
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes:
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback:
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
Am 27.12.2022 hat der Verkäufer die folgenden Angaben hinzugefügt: