MS-B1 CSR8675 Bluetooth 5.0 Receiver DAC Assembled Black For APTX-HD LDAC Car Audio Electronics
Functions:
This Bluetooth receiver uses CSR8675 Bluetooth receiver chip, supports Bluetooth 5.0, and is for APTX-HD/LDAC high-quality lossless music transmission. It is separately decoded with PCM5102, paving the way for good sound quality.
Selected HiFi devices and repeated optimization of circuit. It has two outputs: line (back-end RCA of the device) and preamp (3.5MM headphone port on the front panel). You can connect it to power amplifiers or headphones according to your needs. If you have certain requirements for Bluetooth music, you might as well try this small device.
Features:
- Bluetooth 5.0 lossless transmission.
- As a decoder + a preamp and headphone amplifier.
- CSR8675 Bluetooth chip supports for APTX-HD and LDAC HD lossless formats, and ultra-high sampling frequency, greatly improving sound field and resolution.
- For LDAC UHD lossless format. Its sampling rate reaches 24bit 96Khz, which is twice that for APTX-HD. Sound field resolution is greatly improved.
- For APTX HD HiFi Decoding: Audio technology can ensure that wireless Bluetooth devices can provide HD audio. The technology can protect audio data during audio transmission, providing a listening experience better than that of CD. Supporting for aptx-hd, you can enjoy immersive listening quality when using wireless devices.
- PCM5102A Decoding Chip: PCM5102A is used for independent decoding, which greatly improves sound analysis and layering, supports 24Bit audio DAC, high-frequency sound is not harsh, and low-frequency sound is clean.
- Widely Used: As long as your mobile phones, tablet PCs, etc. have Bluetooth, you can wirelessly connect with the decoder to your active speakers, amplifiers or mixers. Let you easily enjoy the convenience brought by wireless!
- Circuit with HiFi Design: HiFi materials are used in decoding periphery. Op amp 5532 is used for pre-amplification. Multiple independent regulated power supplies. Blue capacitors for Philips. Audio channel uses imported MELF resistors. Dial potentiometer made in Japan and relay for OMRON. Unique chip provides boot and shutdown protections.
Premium Components:
- For PHILIPS audio dedicated capacitor
- American antique audio capacitors
- Analog audio uses imported MELF resistors
- For Japanese ALPS Potentiometer
- For Omron Protection Relay
- For ELNA coupling
- Inductive isolation independent stabilized array
- For nichicon HiFi capacitors
- CSR8675 Bluetooth module
- HiFi film capacitors
- For Sanyo OS solid state decoupling
- PCM5102 independent decoding
Package Included:
- 1 x Set of Bluetooth Receiver
Note:
- It is assembled and ready to use.
- Power supply is not included.
- Due to manual measurement, the size picture bellow is for reference only. Thank for your understanding! The dimensions exclude the sizes of protruding parts.
![](https://www.thanksbuyer.com/image/catalog/67779/67779-01.jpg)
1. POWER: Power switch.
2. POW: Power indicator.
3. BLU: Bluetooth state indicator. (It flashes quickly when there is no connection. It flashes slowly or is always on for successful connection)
4. VOL: Volume adjustment. (Turn to the left side to turn down. Turn to the right side to turn up)
5. HEADPHONE: 3.5MM headphone jack. (As a preamp output, it connects to pure amplifiers)
![](https://www.thanksbuyer.com/image/catalog/67779/67779-02.jpg)
1. BLUE TOOTH: Bluetooth antenna port.
2. R-OUT-L: RCA analog output. (Connect power amps, active sound boxes, etc.)
3. DC-12V: DC power supply input interface. (DC 12V is recommended)
![](https://www.thanksbuyer.com/image/catalog/67779/67779-03.jpg)
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.