Notice:
This is the local store of EASUN POWER in Germany.
You do not need to pay additional value-added tax，We will ship to you from the EU warehouse.
EU customers please rest assured to buy！！
LiFePO4 Battery 51.2V 200Ah 10Kwh Powerwall 16S 48V 100Ah 5Kwh Built-in BMS Parallel 15PCS With CAN RS485＞6000 Cycles For Solar
Features：
1.The external LCD screen is used to monitor the energy storage battery data and operating status in real time.
2.The battery adopts high-performance lithium iron phosphate battery with high safety performance and long service life.
3.M16S series energy storage battery adopts intellizent air cooling and heat dissipation to improve the reliability of the product.
4.External weak current switch reduces product power consumption and improves the safety of transportation and storage.
5.With RS485/CAN communication function, it can easily communicate with the equipment with communication.
6.External wireless module can be connected for remote data monitoring and corresponding control.
7.The energr storage battery is euipped with foot pad and wall mounting bracket, which can met the installation and use in different places.
8. lt has multiple protection functions to protect the safety of power supply inan all-round way.
9.The output is stable and can be connected to different loads with in the voltage rang.
10.Support up to 15 independent modules for parallel use.
|
Model
|
100AH
|
200AH
|
|
NominalVoltage
|
51.2V
|
51.2V
|
|
NominalCapacity
|
100AH
|
200AH
|
|
Effciency
|
≥96%
|
≥96%
|
|
lnnerResistance
|
10mΩ
|
7mΩ
|
|
CellType
|
LiFePO4
|
LiFePO4
|
|
ChargeVoltage
|
58.4V
|
58.4V
|
|
StandardChargingCurrent
|
20A
|
40A
|
|
Max.ContinuousChargingCurrent
|
100A
|
100A
|
|
StandardDischargeCurrent
|
20A
|
40A
|
|
ContinuousDischargeCurrent
|
100A
|
100A
|
|
PeakDischargeCurrent
|
200A(3S)
|
|
DischargeCut-offVoltage
|
42V
|
|
ChargeTemperatureRange
|
0~60°C
|
|
DischargeTemperatureRange
|
-10°C~65°C
|
|
StorageTemperatureRange
|
-5~40°C
|
|
StoraqeHumidity
|
65±20％HR
|
|
Size(LxWxH)
|
440×170×56mm
|
440×206×670mm
|
|
PackageSize(L×W×H)
|
625×520×335mm
|
750×520×385mm
|
|
ShellMaterial
|
SPCC
|
|
NetWeight
|
42kg
|
76kg
|
|
GrossWeight
|
53kg
|
91kg
|
|
PackageMethod
|
1pcspercarton
|
|
CycleLife
|
≥6000times
|
|
SelfDischarge
|
2%permonth
|
|
SOCIndication
|
LEDLight&LCDScreen
|
|
CommunicationProtocol
|
RS485/CAN
|
|
MatchingInverter
|
Growatt,Goodwe,Deye,Luxpower,SRNEetc
|
lifepo4 Battery Installation notes：
Before installation, please read this manual carefully and familiarize the
installation steps.
(1) Be sure to leave a certain space around for heat dissipation during installation.
(2) Avoid sunlight direct and rainwater infiltration during outdoor installation to cause battery damage.
(3) Do not place metal products near the place of the energy storage LiFePO4 battery installation to prevent short circuits.
(4) Virtual connection points and corroded wires may generate high heat, and the molten insulation layer will burn surrounding materials and even cause a fire. Therefore, it must be ensured that the connector has been tightened and the wires should be secured with cable ties to avoid loosening of the connector due to shaking during mobile applications.
(5) After the battery switch is turned off,there is still high voltage inside the energy storage case.Please do not open or touch the internal components, and external short circuit is strictly prohibited.
(6) Please do not install it in a harsh environment where a large amount of damp, greasy, flammable and explosive dust gathers.
(7) lt is forbidden to reverse the charging and discharging terminals of the battery, other wise it is very easy to damage the battery or cause unpredictable risks.
(8) When the fan is working, please do not touch it to avoid injury.
(9) When installing the battery on the wall, you must first ensure the bearing capacity of the wall and check whether the screws are installed firmly to avoid unnecessary danger.
(10) lf an injury occurs during installation or use, please seek medical attention in time.
