Features:

Made of premium plastic, heat resistant, anti corrosion.

Small size and lightweight, convenient installation.

High flow, stable performance and high efficiency.

Fit all drill chucks, you can get a pump with a electric drill.

No need for batteries, eco-friendly.



Specification:

1. To achieve optimum priming and long service life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use.

2. Be sure inlet hose is airtight and as short as possible, inlet hose should not exceed 2.75m.

3. When pumping abrasive fluids or liquids with solids, using a strainer on the inlet line for longer service time.

4. It is recommended that the pump is mounted to a surface for security and ease of use.

5. Mount and start drill, observe whether the inlet pipe has a certain fluid that is sucked into the pump within 15-20 seconds. If not, check that inlet tube is properly mounted to inlet pump. Do not run dry, if pump fails to prime, check if the hose is kinked or clogged.



Package Include:

1 x Drill Pump

2 x Hose Clamps

2 x Connectors