Created for Automation Components:

• Galvo Head Scanning

Cloudray Galvo Head drive and scanning system provides both outstanding accuracy and fast, stable marking of flat surfaces at speeds up to 2000mm per

second (Due to influence of acceleration and low velocity, this is the actual speed).Positioning speed up to10000mm/s with F=160mm.

• F-theta Field Lens

Cloudray Fθ lens helps create vivid markings on flat surfaces, maintaining a consistent, focused spot size across its 7.9"x7.9" (200x200mm) / 11.8"x11.8"

(300x300mm) working area. Producing less than 1% distortion, it flawlessly executes intricate designs with unbelievable precision.

• Fiber Source

Cloudray Fiber Laser Source enjoys stable and dependable operation with a mean time to failure over 100,000 hours thanks to its world-famous

laser source. No annealing ,most common and popular , can tackle most jobs and parameters.

• EzCad2 Lite Software

Cloudray Fiber Marking comes with EzCad2. For Microsoft Windows XP, VISTA, Win7, Win10 operating systems,and a wide range of graphics formats.It can

fully supports Unicode,so basically all languages can be supported.

 

Intuitive Operation:

• Red Dot Guidance

Visible laser pointers help make focusing quick and easy. The built-in red laser locator calibrates with the laser's scanner to allow precision work on the

machine's workbed.

• Convenient Manual Focus

Achieve consistent focus on various materials using the support column's helpful ruler. Rotate the focus-height wheel for quick focusing on every material.

• Emergency Stop Button

Push the emergency stop button turn off all power if anything wrong happened. Separate emergency stop button is more convenient than twisting the key.

• Rotary Axis Compatible (Optional)

Built-in standard rotary axies (not included) with 4-pin connectors. Enjoy plug and play engraving of rings, bracelets, cups, tubes, and other cylindrical

surfaces. (If you choose with rotary axies driver Machine Model).

 

Steps for Machine Power on:

Easy to set up, take your time,Remember to twist & pull the big red emergency stop button

Step 1: Put on your protective eyewear.

Step 2: Turn on the machine by following these steps:

• Rotate in the direction of the arrow and pop out the emergency stop button.
• Press the controller switch.
• Press the laser switch.

JPT M7 Laser 60W

 

	Unit	Parameter
Product Model		YDFLP-60-M7-M-R
M2		<1.5
Delivery Cable Length	m	3
Nominal Average Output Power	W	>60
Maximum Pulse Energy	mJ	1.5
Pulse Repetition Rate Range	kHz	1 ~ 4000
Pulse Duration	ns	2~500
Output Power Stability	%	<5
Cooling Method		Air Cooled
Supply DC Voltage (VDC)	V	48
Current Consumption	A	<6
Environmental Supply Current	A	>6
Power@20℃	W	<260
Central Emission Wavelength	nm	1064
Emission Bandwidth@3dB	nm	<15
Polarization		Random
Output Beam Diameter	mm	7±0.5
Output Power Tuning Range	%	0 ~ 100
Operation Temperature	℃	0 ~  40
Storage Temperature	℃	-10 ~ 60
N.W	KG	8.2
Size(L×W×H)	mm	325 × 260 × 75