Description

 

2500V USB Isolator USB To USB Isolator With Shell Industrial Coupling Isolation ADUM4160/ADUM3160

Features:
- USB isolator
- Signal isolation voltage 2500v
- Power isolation voltage 1500v
- 1W power supply
- Small and easy to carry
- No driver, plug and play
- The shell is made of high-transparency PC. The craftsmanship and quality inside the product are visible

Application Scenarios:
1. A working environment with strong electricity and strong interference. Some circuits contain strong electricity and strong interference (such as high-voltage electricity, frequency converter, motor drive, etc.) environment. When it comes to computer connection, it must be isolated to ensure computer and personal safety.
2. Noise sensitive areas. We can use this device to isolate the USB interface for communication. Suitable for high-precision USB data acquisition system, HIFI audio system, etc.
3. For USB debugging device such as JTAG/SWD emulators of various USB interfaces, ISP/ASP/IAP/ICP downloaders, etc. When it fails to connect devices and the simulation is abnormal during the debugging process, you can use the USB isolator to improve the situation.
4. Various industrial control USB devices. In an industrial environment, USB devices often crash, such as USB mouse, keyboard, USB-to-serial and other communication devices. USB isolators can reduce the chance of crashing and damaging these devices in industrial environments. Sometimes it is necessary to extend a USB cable, and the USB isolator can act as a very good USB repeater, and can also isolate the ground voltage difference between upstream and downstream equipment.

Supported Devices (tested):
1. Full-speed devices: USB disk, digital camera, card reader, mobile hard disk, U-shield, USB hub, AVR JTAG, AVR ISP, AVR ISP MKII, S-Lab, JET51, J-Link, FET430UIF, PICKIT2, XDS 100, LPC-Link, ICD 2, USB to serial port (FT232, CP2102, PL2303, CH341 chip).
2. Low-speed devices: keyboard, mouse, etc.

Unsupported Devices (tested):
1. USB wireless card, digital interface, DAC, and some USB 3.0 U disks.

Specifications:
- Dimensions: 6.6 x 2.4 x 1.4cm/2.6 x 0.9 x 0.6" (LxWxH)
- Power output: 5V 200ma
- Scheme: for ADI scheme
- Isolation voltage: signal isolation 2500V and power supply isolation 1500V
- Interface speed: supports low-speed 1.5M, full-speed 12M (default full-speed); not support USB 2.0 high-speed devices
- Power supply: powered by computer host USB port (no additional power supply required)
- Transmission mode: Support USB control transmission, bulk transmission, interrupt transmission, isochronous/isochronous transmission, etc.
- Input port: USB male connector
- Output port: USB female connector with output 5V/200MA max (1W)
- Transmission medium: twisted pair or shielded wire
- Support system: support all operating systems, driver-free. Applicable to all communication software, regardless of protocol. Not support 480M USB 2.0 high-speed device

Package Included:
- 1 x USB Isolator