Store Categories

1000W 50A Voltage Adjustable Step Down Module DC25V-90V to DC2.5V-50V Converter

Details

Product features:
1. Made of high-quality materials, the output current supports 35A, and the maximum peak current for electric tools supports 50A.
2. Stable performance, output voltage supporting DC2 5-50V adjustable, suitable for applications where the output voltage is less than the input voltage.
3. Exquisite appearance, simple operation, and output voltage can be adjusted by adjusting the potentiometer.
4. Convenient to use and wiring, easy to connect according to interface instructions.
5. It has a wide range of applications and is suitable for electric tools such as angle grinders, impact drills, wrenches, electric hammers, electric screwdrivers, and so on.
 
Product parameters:
Name: Non isolated adjustable step-down module
Input voltage: DC25-90V
Output voltage: DC2 5-50V adjustable, suitable for applications where the output voltage is less than the input voltage. Be careful not to boost the voltage
Output current: 35A, used for power tools with a peak current of 50A. Long term high current usage such as modules requires increased ventilation and heat dissipation when the temperature exceeds 75 ℃.
Output power: 1000W/Max
Lowest voltage difference: minimum 5V, higher input voltage increases the lowest voltage difference
Size: bare board 120 * 96 * 28mm; With shell 130 * 98 * 41mm
Usage: Electric tools (angle grinder, impact drill, wrench, electric hammer, electric screwdriver, and other electric tools)
 
Instructions for use:
1. The module without constant current cannot be directly used for output charging.
2. The module is an accessory and not a finished product. Please have some professional knowledge to use it to avoid unnecessary losses.
3. For high current usage, please match the thickened wire reasonably and firmly connect the wire head.
4. If used for other purposes, the current should be controlled within 35A for use.
5. If used for charging, add a diode to prevent backflow at the output.
 
Product List:
1X step-down module (optional with or without casing)


This is the description of Payment Method. 


Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

This is the description of Returns Policy. 

Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

Copyright©2017 DataCaciques

1000W 50A Voltage Adjustable Step Down Module DC25V-90V to DC2.5V-50V Converter

Details

Product features:
1. Made of high-quality materials, the output current supports 35A, and the maximum peak current for electric tools supports 50A.
2. Stable performance, output voltage supporting DC2 5-50V adjustable, suitable for applications where the output voltage is less than the input voltage.
3. Exquisite appearance, simple operation, and output voltage can be adjusted by adjusting the potentiometer.
4. Convenient to use and wiring, easy to connect according to interface instructions.
5. It has a wide range of applications and is suitable for electric tools such as angle grinders, impact drills, wrenches, electric hammers, electric screwdrivers, and so on.
 
Product parameters:
Name: Non isolated adjustable step-down module
Input voltage: DC25-90V
Output voltage: DC2 5-50V adjustable, suitable for applications where the output voltage is less than the input voltage. Be careful not to boost the voltage
Output current: 35A, used for power tools with a peak current of 50A. Long term high current usage such as modules requires increased ventilation and heat dissipation when the temperature exceeds 75 ℃.
Output power: 1000W/Max
Lowest voltage difference: minimum 5V, higher input voltage increases the lowest voltage difference
Size: bare board 120 * 96 * 28mm; With shell 130 * 98 * 41mm
Usage: Electric tools (angle grinder, impact drill, wrench, electric hammer, electric screwdriver, and other electric tools)
 
Instructions for use:
1. The module without constant current cannot be directly used for output charging.
2. The module is an accessory and not a finished product. Please have some professional knowledge to use it to avoid unnecessary losses.
3. For high current usage, please match the thickened wire reasonably and firmly connect the wire head.
4. If used for other purposes, the current should be controlled within 35A for use.
5. If used for charging, add a diode to prevent backflow at the output.
 
Product List:
1X step-down module (optional with or without casing)

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

DataCaciques