Description
MVP DMA Board Basic Version General Firmware + Kmbox B+ (Pro) Keyboard Mouse Controller with Screen for LeetDMA
DMA Board Features:
Artix-7 FPGA:
- The PCIe board for LeetDMA contains a 7 series Artix-7 35T FPGA chip designed for highest performance.
SuperSpeed USB3.0:
- The device can communicate over USB3.0 up to 160MB/s. The FT600/FT601 is a SuperSpeed USB3.0 to FIFO interface bridge chip that provides up to 5Gbps of bandwidth.
Fully Compatible:
- It's 100% PCILeech compatible. PCILeech uses the PCIe board for LeetDMA to read and write to the target system memory. It is also usable with any PCILeech compatible software.
User Friendly:
- With the On-Board JTAG you can flash the board for LeetDMA easily with just an USB connection from the Update Port. You are not forced to use complicated JTAG cables.
Flashing:
- OpenOCD can be used to easily flash your own firmware to the device.
Customized Firmware:
- The board for LeetDMA comes pre-flashed with a fully customized firmware so it looks like a usual device for any software on the host system. Just plug it in and start using it without the need of flashing.
- The board also has a physical "Kill-Switch" which can be used if you don't want to use the DMA-Board but don't want to remove it from your computer and also a connector for an external Kill-Switch.
Keyboard Mouse Controller Description:
- The B+ version is Pro version. Dual computer means that computer B can control computer A. The software runs on computer B, and no software is running on computer A. The B+ serial port is connected to computer A, which is the same as connection of B version which is a stand-alone mode.
- Where the serial port is inserted, the serial port driver is installed. Install the CH341 drive, or install the drive wizard for automatic installation.
This version is an upgraded version of Kmbox B. The main differences are as follows:
- Separate the communication serial port from the original keyboard and mouse, which can easily realize dual computer control (USB receiving computer A, USB2 is connected to control computer B, USB3/4 is connected to keyboard and mouse, which can realize the function of computer B controlling computer A).
- The usage of the B+ version is consistent with that of the Kmbox B version, and all APIs are compatible. If you need to operate dual computers, you are recommended to buy the B+ version. Serial port is connected to AI analysis computer B. Controlled terminal computer A. Computer B can directly control computer A.
Package Included:
- 1 x MVP DMA Board
- 1 x Kmbox B+ with Screen
DMA Board Features:
Artix-7 FPGA:
- The PCIe board for LeetDMA contains a 7 series Artix-7 35T FPGA chip designed for highest performance.
SuperSpeed USB3.0:
- The device can communicate over USB3.0 up to 160MB/s. The FT600/FT601 is a SuperSpeed USB3.0 to FIFO interface bridge chip that provides up to 5Gbps of bandwidth.
Fully Compatible:
- It's 100% PCILeech compatible. PCILeech uses the PCIe board for LeetDMA to read and write to the target system memory. It is also usable with any PCILeech compatible software.
User Friendly:
- With the On-Board JTAG you can flash the board for LeetDMA easily with just an USB connection from the Update Port. You are not forced to use complicated JTAG cables.
Flashing:
- OpenOCD can be used to easily flash your own firmware to the device.
Customized Firmware:
- The board for LeetDMA comes pre-flashed with a fully customized firmware so it looks like a usual device for any software on the host system. Just plug it in and start using it without the need of flashing.
- The board also has a physical "Kill-Switch" which can be used if you don't want to use the DMA-Board but don't want to remove it from your computer and also a connector for an external Kill-Switch.
Keyboard Mouse Controller Description:
- The B+ version is Pro version. Dual computer means that computer B can control computer A. The software runs on computer B, and no software is running on computer A. The B+ serial port is connected to computer A, which is the same as connection of B version which is a stand-alone mode.
- Where the serial port is inserted, the serial port driver is installed. Install the CH341 drive, or install the drive wizard for automatic installation.
This version is an upgraded version of Kmbox B. The main differences are as follows:
- Separate the communication serial port from the original keyboard and mouse, which can easily realize dual computer control (USB receiving computer A, USB2 is connected to control computer B, USB3/4 is connected to keyboard and mouse, which can realize the function of computer B controlling computer A).
- The usage of the B+ version is consistent with that of the Kmbox B version, and all APIs are compatible. If you need to operate dual computers, you are recommended to buy the B+ version. Serial port is connected to AI analysis computer B. Controlled terminal computer A. Computer B can directly control computer A.
Package Included:
- 1 x MVP DMA Board
- 1 x Kmbox B+ with Screen
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Nov 11, 2023 at 02:37:10 PST, seller added the following information: