Feature
1、STABLE AND SMALL: The sensor adopt high accuracy temperature and humidity measurement unit, possess long term stability and small size 2、WIDE RANGE: Using a dedicated analog circuit, the use range is wide, come with 10~30V wide voltage range power supply, very practical 3、WALL OR RAIL MOUNT: Temperature humidity transmitter is easy to install, support wall mounted or rail mounted, possess IP65 high dust resistance, rain and snow protection with good breathability 4、INDUSTRIAL GRADE CHIPS: The circuit adopts industrial grade microprocessor chips and imported high accuracy temperature and humidity sensors to ensure excellent reliability, high accuracy and interchangeability 5、CONNECT TO VARIOUS EQUIPMENT: Adopt standard industrial interface 0~10V analog signal output, can be connected to on site digital display, PLC, inverter, industrial control host and other equipment, safe and reliable, possess beautiful appearance, easy installation
Item Type: Temperature Humidity Transmitter
Product Size: Approx. 147 x 88 x 41mm / 5.79 x 3.46 x 1.61in
Dust Proof Protection Grade: IP65
Power Supply Wiring: Wide voltage 10~30V DC power input, for 0-10V output devices, only 24V can be used
Output Interface Wiring: The standard configuration of the device is to have 2 independent analog outputs
Material: ABS
Weight: 157 g / 5.5 oz(approx.)
Specific Wiring:
Item | Circuit identification | Description |
Power supply | VCC | Positive power |
GND | Negative power / negative signal | |
Output | TH | Positive temperature signal |
RH | Positive humidity signal |
Parameter:
DC power supply (default) | DC 24V | |
Maximum power consumption | Current output | 1.2W |
Voltage output | 1.2W | |
A accuracy | Humidity | ±2%RH(60%RH, 25℃) |
Temperature | ±0.4℃(25℃) | |
B accuracy | Humidity | ±3%RH(60%RH,25℃) |
Temperature | ±0.5℃(25℃) | |
Temperature range | -40℃~+120℃,default -40℃~+80℃ | |
Humidity range | 0%RH-100%RH | |
Transmitter circuit working temperature and humidity | -20℃~+60℃, 0%RH~95%RH(non condensing) | |
Probe operating temperature | -40℃~+120℃, default-40℃~+80℃ | |
Probe working humidity | 0%RH-100%RH | |
Long term stability | Humidity | ≤1%RH/y |
Temperature | ≤0.1℃/y | |
Response time | Humidity | ≤8s(1m/s wind wpeed) |
Temperature | ≤25s(1m/s wind wpeed) | |
Output signal | Voltage output | 0~10V |
Load capacity | Voltage output | Output resistance≤250Ω |
Current output | ≤600Ω | |
Hole Size | Approx. 70mm / 2.76in | |
Parameter settings | Modify directly through software settings or buttons |
Product Selection:
RS- | Other standards |
WS- | Temperature humidity transmitter sensor |
V10- | 0~10V voltage output |
Common Problems and Solutions:
No Output or Wrong Output Possible Causes:
1. The wrong range corresponds to the PLC calculation error. For the range, please refer to the technical specifications in the first part.
2. The wiring method is incorrect or the wiring sequence is wrong.
3. The power supply voltage is incorrect.(24V power supply for 0-10V type)
4. The distance between the transmitter and the collector is too long, causing signal disorder.
5. The PLC acquisition port is damaged.
6. Equipment damage.
Package List
2 x Screw
2 x Wall Plug
1 x Transmitter
1 x User Manual
Note
1. 24V power supply for 0‑10V type.
2. The device does not provide communication line by default, the line color is for reference only.