Crown 160MA 60w Commercial 70V Amplifier+(2) Indoor/Outdoor Black Wall Speakers
Click Thumbnails to Enlarge
Condition and Warranty
Condition: BRAND NEW IN ORIGINAL PACKAGING
Warranty: 6 YEAR MANUFACTURER
Product Description
Package Includes:
- (1) Crown 160MA Commercial/Restaurant 4 Input 60 Watt 70V Volt 8 Ohm Mixer Amplifier
- (1) Pair Rockville WET-44 PRO Dual 4" 4-Way Swivel 70V Commercial Speakers in Black
Authorized Crown Dealer!
Description of 160MA:
Crown's 160MA is a high value mixer-amplifier for commercial audio. It provides 8-ohm and constant-voltage outputs (100V). Typical uses are paging, background music, and music-on-hold. The 160MA provides 4 inputs (each with a volume control) and a 60W amplifier output. Other features include priority muting, voice activated muting, phantom power, and bass and treble controls.
Features:
- Crown Commercial/Restaurant 160MA 4 Input 60 Watt 70 Volt, 8 Ohm Mixer with Amplifier
- Frequency Response: 50 Hz - 20kHz
- Signal-to-Noise Ratio: > 58 dB - 78 dB
- THD + Noise: < 0.5% at rated power at 1 kHz, 0.1% at 5W at 1 kHz
- Input Sensitivity: Input 1: Mic 3mV, Line 800 mV, Input 2: 400mV, Input 3: 400mV
- Input Impedance: 2.2 kOhms - 10 kOhms
- Crosstalk: -82 dB at 1 kHz
- Line Output Level: 1V into 10 kOhms
- Phantom Power: 15 VDC
- AC Line Voltages Available: Universal Power Supply. Line voltage tolerance +15%, -20%
- IEC Power Connector: 15A
- 4 inputs (each with a volume control), and one 60W amplifier output channel in 160MA
- Ideal for paging, background music, and music-on-hold
- Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
- Priority muting by VOX or external switch
- Bass and Treble controls on master output
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
- Product Dimensions (H x W x D): 4.1" x 9.5" x 13.9" inches
- Product Weight: 8 Lbs.
All About Your WET-44 PRO Speaker (Home Use):
How To Set Up WET-44 PRO Speakers:
How To TAP Your WET-44 PRO Speakers:
All About Your 70 Volt:
4-Way Swivel
The Rockville WET-40 Pro Black features a 4-way swivel bracket that allows you to mount the speaker to your wall and angle it left/right and up/down. The 4-way swivel makes sound staging in large rooms easier and more efficient.
Custom tuned sound
The WET-44 PRO uses a dual ported enclosure design giving it an edge with bass frequencies. It also has 2 drivers to disperse the sound at a wider angle. The sound quality on these are superb. They are extremely balanced and pleasant to listen to.
IPX55 rated!
These speakers are IPX55 rated. This means you can install them indoors or outdoors. They can withstand heavy rain, moisture, sun, dust, and even jet streams of water hitting the speaker from multiple angles. We went above and beyond in terms of product development to get these speakers IPX55 rated. The cabinets are made from a high quality waterproof plastic material. The grill is made of aluminum and will never rust from outdoor use. We use powder coated steel brackets to ensure that the brackets wouldn't rust either. The brackets pass a 96 hour salt water spray test. Even the speaker wire terminals are waterproof and rustproof!
What is 70 volt ?
70 volt systems are the number one choice for applications where you want to install many speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, you can buy one 70V amplifier with 350 watts and you can install speakers that total close to 300 watts. It does not matter if it is 15 speakers that are 20 watts each or 50 speakers that are tapped at 5 watts each.
You always want your 70 volt amp to have at least 15 or 20% more power than the combined watts your speakers are tapped at.
When we say the word tap, what we are referring to are the selectors these speakers have on them. For example, these speakers have selectable options of 2.5w, 5w, 10w, 20w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. This gives you full customization over the sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, the speakers by the bar area at 20 watts, and the ones in the hallway at 2.5 watts.
Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc.
70 volt systems allow you to run very long lines of speaker wire without signal loss. This is ideal when running long speaker leads.
The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.
Features:
- Pair Rockville WET-44 PRO Dual 4" 4-Way Swivel 70V Commercial Speakers in Black
- Extremely well balanced sound quality with wide angle sound dispersion
- 4-Way swivel bracket allows angle adjustments up, down, left, and right
- IP55 Weather resistant rating makes this perfect for outdoor use or indoor use
- IP55 means this can withstand jet streams spraying it from any angle without any damage
- Rugged waterproof cabinet
- Aluminum grill is waterproof and rustproof
- Powder coated steel mounting brackets that pass a 96 hour saltwater spray test
- 4” Woofer with Polypropylene cone
- 20mm PEI tweeter is very efficient and has great sound quality
- Frequency Response: 65Hz – 20Khz
- Sensitivity: 83dB +-2dB
- RMS Power handling: 45w (when using 6 ohm)
- Waterproof spring loaded terminals
- Built in transformer supports 70V or 8 ohm installations
- Built in tap switch to easily select your 70V power
- Color: Black
- Weight: 5 LBS each
- Cabinet dimensions (inches): 12.2” x 7.4” x 11.7” (310x188x298mm)
- There is a 70V tap switch on the speaker so you can easily select how many watts you want the speaker to get from the amp.
- Nominal impedance: 6 Ohm will give you even more power when connecting to a standard 4-8 ohm stable amplifier
70V Power Options:
- 30w
- 15w
- 7.5w
- 3.75w
- By-pass (6 Ohm) (Use this for standard non-70v stereo receivers)
6 Ohm power:
- 45w
Return Policy
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 6 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
- We will send you a pre-paid shipping label to replace the item for a brand new one.
- We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
- If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You MUST notify us within 48 hours if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.
Item Code: 160MA+WET-44 PRO BLACK