Beschreibung:
1. Material: hochwertiges ABS-Material + Aluminiumlegierung Material, leicht und langlebig, wasserdicht und stoßfest.
2. Entwurf: Multifunktionale Split-Design, das Hauptlicht und links und rechts Blinker kann in Spleißen verwendet werden, oder kann zerlegt und unabhängig installiert werden, frei und bequem, und begleiten Sie Ihre Nacht Reiten.
3. Lichtquelle: helle LED-Lampe Perlen, das Licht ist hell und nicht blenden.
4. Aufladen Methode: Smart USB Laden, kompatibel mit mehreren Lademethoden, schnell und bequem.
5. Drahtlose Fernbedienung: Intelligente drahtlose Fernbedienung, können Sie schnell die Lichter nach den Straßenbedingungen während der Fahrt einschalten, so dass die Fahrzeuge hinter Ihnen genug Reaktionszeit, und ein Gefühl der Sicherheit.
6. Beleuchtungsmodus: Hauptlicht: 3 Stufen einstellbar (konstantes Licht / Blinken / schnelles Blinken) Blinker: 3 Stufen einstellbar (linker Blinker / rechter Blinker / linkes und rechtes Blinken gleichzeitig),Hauptlicht + Blinker: 3 Stufen einstellbar (linker Blinker + Hauptlicht / rechter Blinker + Hauptlicht / linker Blinker + rechter Blinker + Hauptlicht)
7. Anwendbar auf: Mountainbikes, Rennräder, Fahrräder, etc. verschiedene Modelle.
Spezifikation:
Name: Fernbedienung Fahrrad Blinker USB wiederaufladbare Split-Rücklicht Nachtfahrt Warnlicht
Farbe: schwarz (wie auf dem Bild gezeigt)
Lichtquelle: LED
Auflade-Methode: USB-Aufladung
Verwendung der Batterie: eingebaute Lithium-Batterie
Batteriekapazität: Hauptlicht 500 mA, Blinker 300 mA
Aufladezeit: 1-2h
Betriebszeit: Hauptlicht 5-7h, Blinker 16-18h
Die Beleuchtungsmodi sind wie folgt:
Hauptlicht: 3 Stufen einstellbar (konstantes Licht/blinkend/schnell blinkend)
Blinker: 3 Stufen einstellbar (linker Blinker/rechter Blinker/links und rechts blinken gleichzeitig)
Hauptlicht + Blinker: 3 Stufen einstellbar (linker Blinker + Hauptlicht / rechter Blinker + Hauptlicht / linkes Blinkerlicht + rechtes Blinkerlicht + Hauptlicht)
Wasserdicht: lebenslang wasserdicht
Größe der Hauptlampe: 45*55mm
Größe des Blinkers: 50*57mm
Größe der Verbindung: 15.2*4.7cm
Nettogewicht: 87g (einzelne Lampe)
Bruttogewicht: 227g
Packungsliste:
2*Autolampe
4*Blinker
2*Einzelkopf-Datenkabel
2*Doppelkopf-Datenkabel
2*Fernbedienung
6*Halterungsschnalle
8*Gummiring
1*Anleitung
Anleitungen:
1. Der Hauptlichtmodus ist unterteilt in: Langes Einatmen - Blinken - Aus. Wenn das Hauptlicht eingeschaltet ist, können Sie den Modus über die Taste für die Steuerung des Hauptlichts auf der Fernbedienung umschalten, oder Sie können den Modus manuell durch kurzes Drücken des Hauptlichtschalters umschalten.
2. Der Blinker und das Hauptlicht blinken sofort, wenn die Batterie zu schwach ist. Bitte laden Sie sie rechtzeitig auf, um die Nutzung nicht zu beeinträchtigen. Während des Ladevorgangs leuchtet die Ladekontrollleuchte rot, und die Kontrollleuchte leuchtet grün, wenn sie vollständig geladen ist.
3. Die Lichter und die Fernbedienung wurden werkseitig gekoppelt. Wenn Sie die Kopplung erneut durchführen müssen, gehen Sie bitte wie folgt vor:
Drücken Sie lange auf die Einschalttaste des linken Blinkers/rechten Blinkers/des Hauptlichts und halten Sie sie gedrückt, bis die Betriebsanzeige blinkt. Nachdem Sie die entsprechende Taste auf der Fernbedienung gedrückt haben, leuchtet der Blinker oder das Hauptlicht auf und zeigt damit an, dass die Kopplung abgeschlossen ist.
Tipps:
1. Aufgrund der manuellen Messung, akzeptieren Sie bitte einen Fehler von 1-3 cm.
2. Aufgrund des Unterschieds zwischen Licht und Bildschirm kann die Farbe des Produkts leicht von der Abbildung abweichen.