eBay

3/5/7mtr 12v Ready Made Split Charge Relay Kit with 140amp Upgraded Digital LED Voltage Sense Relay

New Upgrade Function compared to old version split charge relay

Monitor the voltage in real time via the voltimeter on the split charge relay
shut down the split charge relay via power button
reverse charging via split charge relay
battery protection from overcharging
The switch can be turned off under special circumstances to prevent the isolator from working

All of function is kept from the previous generation split charge relay as below:

Features:

Voltage sensitive relay
12 volt 140 amp
Voltage Digital Display
Red LED indicator.
Allows split charging of second battery bank without discharging the primary/start battery, relay makes at 13.3 volts and breaks at 12.8 volt.
l68 x w 54 x h 68mm.

Applications:
This type of kit is suitable for Camper Vans, Motor homes, 4x4s, Day Vans, Mobile workshops,Cars or Boats.

Voltage sense systems are especially suited for modern vehicles with canbus controlled wiring as this type of kit does not need an ignition feed or any additional wiring and are very simple kit to install, all you need to do is to connect your starter battery to your leisure battery(s) by using the kit supplied, with very easy to understand fitting instructions and a wiring diagram.

The voltage sense relay simply detects the rise in voltage from you vehicles charging system to allow you to charge your leisure battery(s) while your engine is running. When your engine is switched off, the relay will isolate your leisure battery(s) from your main starter battery. So it does not drain your main starter battery and you will always be able to start your vehicle.

The kit includes comes pre-assembled with terminals:

12v 140amp Intelligent Voltage sense Split Charge Relay with Digtial LED Voltimeter Display
2 x 250mm red 70amp cable from Battery to fuse holder leads(Lead terminals pre-crimped)
1 x 500mm red 70amp cable Relay to fuse holder lead(Lead terminals pre-crimped)
1 x 2/4/6 metre (For 3/5/7m kits) 70amp Relay to fuse holder lead(Lead terminals pre-crimped)
1 metre 70amp of Black earth cable(Lead terminals pre-crimped)
1 Pair 8mm Post Type Battery Terminals
2 x MTA MIDI Fuse holders
4 x 60A MTA MIDI Fuses including 2 spares.
Red&Black Heat shrink to protect all the connections.
10 x Cable ties
10 x adhesive cable tie fixings base to keep everything tidy.
15 x fixing screws
Easy to understand Fitting Instructions + after sales support if required

Dear Customer, please note this is a multi-selection listing, we only ship the item to you according to your selection from list, if you only select fuse box only, others will not included.

Thanks!

**Please note**: The 3/5/7 mtrs of Red cable supplied in this kit are made up of the 4 separate leads (such as 3mtr: it was separated to 2M+2*0.25M+0.5M) which is pre-assembled with terminals as described above. choose the correct meter for yourself in case short of wire.

Please note: we only send the item to you base on your selection,please noted!