It is stable function, proportion shadow, safer driving, beautiful outlook than normal HID auto xenon light.
Work with digital control switch function and Bi-xenon lamp holder, when install it to the single-beam lamp holder, it can turn on the four high light sometime, which make sunlight at night.
Innovative HID Bi-Xenon projector lens light system
Dual HID Low Beam & High Beam
Matching with exquisite Angel Eyes & Devil Eyes
Attractive appearance, standard light shadow.
More stable performance and safer using
Easy installation, direct replacement for the stock headlight.
Descriptions:
Brand: TrichTu Mount
Lens Color: Clear
Inner Housing Color: Chrome
Housing Case Finish/ Color: Black
Function Explanation:
1. LED Angel Eye:Always on while turning the key on.
2. Low Beam and LED Devil Eye:low beam on/off switch mounted by the relay harness,it can be used to control the low beam and devil eye on and off.
3. High Beam: Using the original high&low beam switch to control it.
1 ) Parameters Of HID:
Projector Lens Diameter: 2.8inch
Light Color: White (Dual High & Low Beam)
Start-up Voltage: 23KV
Rated Power:12V/35W
Color Temperature Range: 3000K~12000K±250K
Lumin: 3500LM ± 200
Service Life: 4500h
2 ) Parameters Of Angel/Devil Eyes Bulbs:
Input Voltage: 12V
Rated Power: 3W
Service Life: 25000h
Angel Eyes Color: White (Available in white red blue green yellow etc)
Devil Eyes Color: Blue (Available in red white blue green yellow etc)
3 ) Parameters Of Ballast:
Voltage Range: 9-16V
Max Input Current: 10A
Output Wattage: 35W ± 2W
Working Temperature: -40°~+105°
Application: For Kawasaki Z800 2013 2014 2015 2016, Z250 2013 2014 2015, Z300 2015 2016. (Note: Not DOT approved. For off road use only.)
Package Includes:
1 x Fully Assembled Headlight(bulbs included)
2 x HID Ballasts
1 x High/Low Beam On/Off Switch
2 x Angel eyes drivers
1 x Wire harness
Comes with all necessary hardware
Installation: Easy to install back on original position with no modification needed
Basic Function: Illuminate the road ahead during periods of low visibility. Same functionality as original
Direct replacement for your existing scratched and damaged headlights
Advantage:
1. Integration of high and low beam light
Low
beam and high beam are integrated. When the headlight is turned on, the
two lights will be on at the same time, and the high beam or low beam
can be switched at the same time.
2. Low Beam headlight
The
low beam cutting line is clear, and the upper part of the cutting line
is a dark area, so as to avoid affecting the driver's line of sight and
improve the driving safety factor.
3. High Beam
The
headlamp assembly adopts dual lens, which is more focused than the
traditional high beam lamp, increases the lighting penetration,
increases the irradiation distance, and provides more safe driving
guarantee, so that you can drive at night as safe and confident as
driving in the daytime.