Automatic Flow Switch DC12V Auto Diaphragm Water Pump Small Self Priming Pumps

Details

Features
1. Adopting imported corrosion-resistant materials, self-absorption, thermal protection, smooth operation, continuous idling for a long time, and continuous operation with load for a long time.
2. Fully sealed, high stabilized pressure
3. When working, the rubber support can absorb the vibration of the pump.
4. When the water pressure is too high, the pump will protect itself and work normally, the water pipe will not burst, safe and durable
5. Pressure switch type characteristics: when the water is off, it will automatically cut off the power supply, the motor stops, the water is turned on, it will be automatically energized, the motor runs
6. Maximum pressure has been set in the factory, the use of the process can not adjust the maximum pressure
7. Wide range of use, suitable for garbage trucks, sprinklers, carpet cleaning equipment, floor cleaning equipment, vehicle cleaning equipment, road construction equipment, dishwashers, pharmaceutical equipment, chemical equipment, chemical protection equipment, disinfection equipment, cooling systems, pressurization systems, etc.
 
Specification
Voltage: DC12V
Current: 5A
Overall dimension: 165*100*62mm
Inlet and outlet water size: pipe thread 10mm
Power: 60W 70W 72W (optional)
Flow rate: 3-5L/min
Medium temperature: 0-60℃
Pressure: 5-7kg
Protection pressure: 0.8Mpa
General pressure: 0.4-0.5Mpa
Suction range 1-2 meters, head up to 30 meters high
 
Usage
1. The direction with arrow on the pump is the water outlet
2. The wire is not divided into positive and negative poles
3. The pump can be placed in any direction
 
Precautions for use
1. Can not be immersed in water
2. Pressure adjustment screws can not be adjusted at will, the factory pressure has been adjusted, adjusted at will is easy to adjust the reflux pressure, easy to burst water pipes
3. The water inlet must be installed filtration devices, not into the impurities, otherwise it is easy to clog the pump, resulting in reduced pressure and even no water!
 
Common faults and troubleshooting
1. Electricity, the pump does not rotate. Check whether the wire behind the motor is off.
2. Pump rotation, water spray, but the amount of fog is small, the pressure is reduced. Open the pump, check whether the pump cavity is clogged with debris. Whether the motor bracket is loose, tighten the screws. Note that the inlet and outlet valves can not be installed in reverse.
3. Pump use half a year or a - year later, the pressure reduces the spray volume is small. Open the pump, tighten the motor bracket screws; the cavity of the small mold piece up and down to change the direction, or replace the small grinding piece.
 
List
1 x Water pump


This is the description of Payment Method. 


Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

This is the description of Returns Policy. 

Do not dismiss your dream.

To be without dream is to be without hope.

To be without hope is to be without purpose.

Do not run through your life so fast that you forget not only where you have been, but also where you are 

going.

Life is not race, but a journey to be savored each step of the way.

Copyright©2017 DataCaciques

Automatic Flow Switch DC12V Auto Diaphragm Water Pump Small Self Priming Pumps

Details

Features
1. Adopting imported corrosion-resistant materials, self-absorption, thermal protection, smooth operation, continuous idling for a long time, and continuous operation with load for a long time.
2. Fully sealed, high stabilized pressure
3. When working, the rubber support can absorb the vibration of the pump.
4. When the water pressure is too high, the pump will protect itself and work normally, the water pipe will not burst, safe and durable
5. Pressure switch type characteristics: when the water is off, it will automatically cut off the power supply, the motor stops, the water is turned on, it will be automatically energized, the motor runs
6. Maximum pressure has been set in the factory, the use of the process can not adjust the maximum pressure
7. Wide range of use, suitable for garbage trucks, sprinklers, carpet cleaning equipment, floor cleaning equipment, vehicle cleaning equipment, road construction equipment, dishwashers, pharmaceutical equipment, chemical equipment, chemical protection equipment, disinfection equipment, cooling systems, pressurization systems, etc.
 
Specification
Voltage: DC12V
Current: 5A
Overall dimension: 165*100*62mm
Inlet and outlet water size: pipe thread 10mm
Power: 60W 70W 72W (optional)
Flow rate: 3-5L/min
Medium temperature: 0-60℃
Pressure: 5-7kg
Protection pressure: 0.8Mpa
General pressure: 0.4-0.5Mpa
Suction range 1-2 meters, head up to 30 meters high
 
Usage
1. The direction with arrow on the pump is the water outlet
2. The wire is not divided into positive and negative poles
3. The pump can be placed in any direction
 
Precautions for use
1. Can not be immersed in water
2. Pressure adjustment screws can not be adjusted at will, the factory pressure has been adjusted, adjusted at will is easy to adjust the reflux pressure, easy to burst water pipes
3. The water inlet must be installed filtration devices, not into the impurities, otherwise it is easy to clog the pump, resulting in reduced pressure and even no water!
 
Common faults and troubleshooting
1. Electricity, the pump does not rotate. Check whether the wire behind the motor is off.
2. Pump rotation, water spray, but the amount of fog is small, the pressure is reduced. Open the pump, check whether the pump cavity is clogged with debris. Whether the motor bracket is loose, tighten the screws. Note that the inlet and outlet valves can not be installed in reverse.
3. Pump use half a year or a - year later, the pressure reduces the spray volume is small. Open the pump, tighten the motor bracket screws; the cavity of the small mold piece up and down to change the direction, or replace the small grinding piece.
 
List
1 x Water pump

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

DataCaciques