Product Description.
π΅Product name:Beryllium copper plate
π΅
Product Model:C17200 beryllium copper
π΅
Material:Beryllium copper
π΅
Processing:CNC machining
π΅
Width*Length(mm):100*100mm 100*200mm 200*200mm
π΅
Thickness:0.5mm 0.8mm 1mm 1.5mm 2mm 3mm 5mm
π΅
Quantity(pcs):1PCS
π΅
Product Characteristics:High strength, hardness, corrosion resistance
1, beryllium copper alloy set of excellent mechanical properties, physical properties and chemical properties in one, after heat treatment (solution treatment and aging treatment), with special steel equivalent to the high strength limit, elasticity limit, yield limit and fatigue limit, at the same time has a high electrical conductivity, thermal conductivity, high hardness, corrosion resistance, abrasion resistance, good casting performance, non-magnetic and impact non-sparking characteristics, in the mould making, Machinery, electronics and other industries are widely used.
2, no sand holes, air holes, balanced hardness, dense organisation, high strength, good thermal conductivity, good electrical conductivity, corrosion resistance, excellent abrasion resistance, good processing performance, high pressure conditions, stable performance, non-magnetic, excellent polishing performance, good anti-adhesion performance.
π΅
Application: automotive moulds, wear plates, injection moulds and high-pressure blow moulds, mould inserts, rapid cooling, aluminium alloy mould inserts, increase strength, wear resistance and shorten the injection cycle, hot runner nozzles, electrodes and punches, non-magnetic moulds, non-magnetic tools, high thermal conductivity bearings, and can be made of mirror surface with high precision.
π΅
Brief introduction:
C17200 beryllium copper, a full range of beryllium copper is known as "the king of elasticity of non-ferrous metals" for all kinds of requirements of high-strength, high elasticity, high hardness, high wear-resistant micro-motor brushes, switches, relays, connectors, thermostats, spring plate, spring plates, various types of spring plate, with the reliability of the product, the service life of the requirements of the higher and higher, the demand for beryllium copper will also be more and more large. Demand will also be more and more
π΅
Chemical composition:
Beryllium Be:1.90-2.15
Cobalt Co:0.35-0.65
Nickel Ni:0.20-0.25
Copper Cu:remainder
Silicon Si:<0.15
Iron Fe:<0.15
Aluminium Al:<0.15
Comparison standard:AISI C17200
π΅
Main performance indicators:
Tensile strength(Mpa):1105
Specific gravity(g/cm3):8.3
Yield strength(0.2%)Mpa:1035
Softening temperature(β):930
Elongation(%):1
Modulus of elasticity(Gpa):128
Hardness(HRC):38-44
Thermal conductivity(W/m.k20β):105
Electrical conductivity(IACS%):18
Note: The above data is for reference only, there is a slight error.