Technical Specification:
Plug Type: 9005 + 9006, High-Low Beam
LED Quantity(each bulb): 2pcs COB chips
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight
Advantage:
*COB chip(USA) light source, 3 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*Xenon white light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Heat Pipe Technology + A380 Aluminum Heatsink the light bulb in appropriate working temperature
*Built-in constant current CPU, instant full brightness without start-up relay
Plug Type: 9005 + 9006, High-Low Beam
LED Quantity(each bulb): 2pcs COB chips
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight
Advantage:
*COB chip(USA) light source, 3 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*Xenon white light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Heat Pipe Technology + A380 Aluminum Heatsink the light bulb in appropriate working temperature
*Built-in constant current CPU, instant full brightness without start-up relay
Package Included:
2x 9005 LED High Beam Bulbs
2x 9006 LED Low Beam Bulbs
Automotive LED headlamps advantages:
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K-6500K.
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K-6500K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.