NEW! No box - No accessories 

This Transaction is for 1 dual band antenna

About this item

[TP542] 13dBi Panel Antenna / High-Gain / Long-Range / Dual-Band / Outdoor / Directional / N-Female connector

[WIRELESS] designed to collects the signal and increase reception from a remote location or bridge WiFi networks between two points or objects that are far apart

[DUAL-BAND 2.4Ghz and 5Ghz] eliminates the need to purchase different antennas for each frequency range and single antenna can be used for both frequencies.

[DIRECTIONAL] focus the signal in one direction to increase reception leading to greater gain figures.

TP542 13dBi WiFi High-Gain Panel Antenna

Panel antenna is used to radiate the signal into the forward space. The primary purpose is to reach places where a device with a default antenna would not reach. It is designed for use on stationary objects such as buildings or houses, but it is widely used for remote connection at campgrounds, RV motorhomes, boats, or remote devices like WiFi cameras.

Antenna collects the signal and sends it through the cable to a networking device. It is equipped with an N-Female connector and it is ready to connect to a device with a proper extension cable. It requires a 50 Ohm RF coax expansion cable with N-Male connector on the antenna side and connector type that fits the device on the other side. As a rule of thumb, always use the shortest line and thickest cable to avoid signal loss. Do not use RG59/RG6 coax (75 Ohm TV cable) – signal will be seriously degraded.

Dual-Band covers both 2.4GHz and 5GHz frequency spectrum.

Dual-band or multi-frequencies equipment is capable of transmitting a signal in either of two different standard frequency ranges. The primary differences between the 2.4 GHz and 5GHz wireless frequencies are range and bandwidth; while the 5GHz range provides faster data rates but at a shorter distance, 2.4GHz offers coverage for further distances but may perform at slower speeds. The router or access point device needs to have a detachable external antenna connector that supports both ranges in a single antenna.

Directional Long Range Point-To-Point

This directional antenna is designed for point to point directional wireless applications. To maximize the benefits of this antenna type, point the signal beam to a remote WiFi node. It provides the most focused 13dBi signal in a narrow beamwidth of ~40° horizontally and ~35° vertically.

The distance this antenna can reach may vary based on obstacles on the antenna path to the remote WiFi node like walls, trees, and other objects. The best signal gain is when a “direct line of sight” between the antenna and the remote location is possible.

Gain: 13 dBi • Frequency: 2400-2500/5150-5850 MHz • VSWR: <2.0:1 • Polarization: Vertical • Horizontal Beamwidth: 2.4GHz-40° 5GHz-41° • Vertical Beamwidth: 2.4GHz-35° 5GHz-33° • Nominal Impedance: 50 Ohms • F/B Ratio: >20 dB • Max Input Power: 100W.

Connector : N Female

Dimension: 5.52x4.73x1.58 inch

Weight: 1.32lb

Reflector Material: Aluminum Alloy

Radome Material: Weatherproof ABS

Mast Size: Ø30-Ø50mm (not included)

Rated Wind Velocity: 210km/h • Operating

Operating temperature: -40~+65℃

Item Dimensions LxWxH ‎3 x 5 x 9 inches

Color ‎White

If, after receiving this item you discover that it was not the one you wanted, simply return it for a full refund within 30 days.  You will have to pay for the return shipping charges.  Refund is void if you have installed, used or damaged the item in any way.  Item must be returned with its original box, packing materials and instructions.

Sku: #ST-96