eBay

The following filaments are 100% clean wound -- PLA/PLA+/PLA Meta/PETG /SILK PLA+ (ABS/TPU/PLA Marble is not included.)
Filament	Wire Diameter	Tolerance	Printing tempe	Print speed	Traction (KGF)	Melting point	Elongation at break	Net weight	Length
PLA	1.75MM	±0.02MM	200-230℃	50-100mm/s	11-16	7-9g/10min (190 ℃, 2,16 kg)	4%	1 kg/Roll 0.25kg/Roll	330M
PLA Carbon Fibre			200-230℃	50-100mm/s	11-14	11-16g/10min (220 ℃, 2,16 kg)	4%	1 kg/Roll	300M
PLA+			210-235℃	50-100mm/s	9-12	4-8g/10min (190℃,2.16kg)	45%	1 kg/Roll	330M
PLA Meta			180-200℃	50-100mm/s	9-12	8-10g/10min (190℃,2.16kg)	35%	1 kg/Roll 0.25kg/Roll	330M
PETG			220-250℃	50-100mm/s	8-14	6-11g/10min (220℃,2.16kg)	210%	1 kg/Roll	320M
SILK PLA+			200-230℃	30-60mm/s	6-8	4-8g/10min (190℃,2.16kg)	200%	1 kg/Roll	330M
TPU			185-215℃	20-40mm/s	/	5-8g/10min (190℃,2.16kg)	600%	500g/Roll	165M
ABS			230-270℃	50-100mm/s	6-11	12-19g/10min (220℃,10kg)	25%	650g/Roll	395M
WOOD			170-190℃	30-60mm/s	8-13	7-12g/10min (190℃,2.16kg)	4%	1 kg/Roll	330M

About this project

【Neatly Wound Filament, Moisture Free】JAYO Fialment is carefully wrapped to avoid tangling, dried and vacuum sealed in a sealed bag with desiccant, so that the filament is delivered to you in the best possible condition and free of dust or residue.

【Fully Recycled Cardboard Spool】3D printed filament spools and boxes are made of fully recycled cardboard for easy sorting and full recycling. The fine filament retains the same formula and quality.

【 Compatible with 99.9% of 3D printers!】Our premium 3D printing filament works perfectly for all 1.75mm FDM 3D printers. The strong filament measures 1.75 mm in diameter with a dimensional accuracy of + /roz0.02 mm.

【 Risk-free after-purchase technical support】We will offer a full refund if the product does not turn out as expected. Let us help you create the perfect and beautiful print and feel free to contact us via eBay

How to store:
1.If you leave your printer inactive for more than a few days, please retract the filament to protect your printer nozzle.
2.To prolong the life of your filament, please put the unsealed filament back into the original vacuum bag and store it in a cool and dry place after printing.
3.When storing your filament, please feed the loose end through the holes on the edge of the filament spool to prevent coiling so that it will feed properly the next time you use it.