Anmerkung:
Die Grenzsicherungsschraube kann nicht bewegt werden. Es spielt eine schützende Rolle der Fahrgrenze und ist ein wichtiger Teil des sicheren und stabilen Betriebs der Ausrüstung.
Das Heben muss über den Fernsteuerungsgriff eingestellt werden, und der manuelle Schalter kann nicht verwendet werden, um das Heben zu steuern.
Stellen Sie nach dem Heben sicher, dass Sie die oberen und unteren Grenzwerte über den Fernsteuerungsgriff zurücksetzen.
Feature:
Entworfen für die vollständige Verblendung des Projektors
Positive mechanische Hub-/Fallgrenzwerte
Schwerlastkonstruktion: 10 kg
Integriert mit den meisten Steuerungssystemen: IR-Fernbedienung und manuelle Bedientaste
Platz für Kabelmanagement und Projektor-Montagehalterung muss bei der Bestellung berücksichtigt werden
2 Jahre Garantie
Spezifikationen
Farbe: Weiß
Spannung: 220 V
Anschlag: 1 m
Leistung: 24 W
Max. Last: 10 kg
Grundplatte: 50x50 cm
Größe: 50x50x35 cm
Gewicht: 17 kg
Paketinhalt
1 X Projektor Lift
Anwendung:
Dieser Projektor-Heber wird in der Schule, im Versammlungsraum und in einem anderen verwendet. Der Projektorlift kann den Projektor verstecken, und dieser Aufzug enthielt eine Fernbedienung, so dass es schöner und bequemer ist.
Installationsprozess:
1) Bestätigen Sie den Installationsort des Aufzugs basierend auf der Bildschirmgröße und Projektorfokus, dann machen Sie ein Deckenloch (47 cm × 47cm) (Diese Größe ist nur für Vorschlag, Sie können anpassen, wenn Sie spezielle Anforderungen haben);
2) Bestätigen Sie die Montagelöcher basierend auf dekorativer Plattengröße. Mit den vier Teilen M8 × 12 Schrauben Explosion, um die Aufhängermontageplatte abzusetzen;
3) Setzen Sie den Projektorlift in die Montageplatte und verwenden Sie vier Teile M6 × 12 Schrauben, um festzuziehen;
4) Elektronischer Endschalter, Speicherpositionierung
5) Installieren Sie dekorativen Boden, justieren Sie die Schraube, um dekorative Platte parallel zur Decke zu machen;
6) Installation Universalkopf, fester Projektor;
7) Streng in Übereinstimmung mit der schematischen Verkabelung der Spuren, um ein Einklemmen zu verhindern.
Hinweis:
Die Last dieses Aufzugs ist 10kg, die einseitige Dimension des Projektors kann nicht mehr als 42cm sein, wenn die Dicke des Projektors 10cm ist, ist die minimale volle Hautdicke (Installationsdicke) 37cm, jede Projektordicke fügt 1cm hinzu, und die Installationsdicke fügt 1cm entsprechend hinzu. Die Standardgrundplatte ist 50*50cm, Öffnungsgröße ist 47*47cm. Bitte bestätigen Sie diese Daten, wenn Sie bestellen, damit Sie sie verwenden können.
Note:
The limit safety screw cannot be moved. It plays a protective role of the travel limit and is a key part of the safe and stable operation of the equipment.
The lifting must be adjusted through the remote control handle, and the manual switch cannot be used to control the lifting.
After hoisting, be sure to reset the upper and lower limits through the remote control handle.
Feature:
Designed for total concealment of projector
Positive mechanical lift/drop limits
Heavy duty construction: 10 kg
Integrates with most control systems: IR remote control and manual control button
Space for cable management and projector mounting bracket must be considered when ordering
2 years warranty
Specifications
Color: White
Voltage: 220 V
Stroke: 1 m
Power: 24 W
Max. Load: 10 kg
Baseplate: 50x50 cm
Dimension: 50x50x35 cm
Weight: 17 kg
Package Content
1 X Projector Lift
Application:
This projector lifter is used at school, assembly room and another. The projector lift can put the projector hidden, and this lift included a remote control, so it will be more beautiful and more convenience.
Installation process:
1) Confirm the installation location of the lift based on the screen size and projector focal, then make a ceilings hole (47 cm × 47cm) (This size is only for suggestion, you can adjust if you have special requirement);
2) Confirm the mounting holes based on decorative plate size. With the four pieces M8 × 12 screws explosion, to set down the hanger mounting plate;
3) Put the projector lift into the mounting plate, and use four pieces M6 × 12 screws to tighten;
4) Electronic limit switch, memory positioning
5) Install decorative floor, adjust the screw to make decorative plate parallel to the ceiling;
6) Installation universal head, fixed projector;
7) Strictly in accordance with traces schematic wiring to prevent pinch-off.
Notice:
The load of this lift is 10kg, the unilateral dimension of the projector can not more than 42cm, if the thickness of projector is 10cm, the minimum full hide thickness (install thickness) is 37cm, every projector thickness adds 1cm, and the install thickness adds 1cm accordingly. The standard base plate is 50*50cm, opening size is 47*47cm . Please confirm this data when you order so that you can use it.