MENU : switch between different display,or to enter/exit setting by long press.

UP : press to increase value.

DOWN : presss to decrease value.

Setting:

1.press the [Down] button to ON/OFF load manully at main display.

2.the work mode is working as below:

[24H]      load output 24hours

[1-23H]    load on after sunset and closed after setting hours

[0H]       Dusk to dawn

Parameter:

*all red color voltage X2 ,while using 24V system.

40A 60A 100A MPPT Solar Charge Controller

• The solar regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. It is also suitable for Ni-MH, Li-ion or other batteries.
• There are many kinds of MPPT technology,Our Solar Controller Mppt technology is to detect the maximum charging current,not the boost type or the automatic charging of the solar panel voltage. Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.
• When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.
• This MPPT controller has perfect SOC function, control charge current, and supply power to the loads.Prevent the battery from over-charging , over-discharging and reverse charging to solar panels during nights.
• Any problem please contact with us , we will try our best to solve your problem and make you satisfied within 24 hours.

SY-MPPT-60A 80A 100A MPPT Solar Battery Charge Regulator Controller 12V 24V/36V 48V Auto

Feature:

1. Advanced MPPT maximum power point tracking technology, the tracking efficiency is no less than 99.5%.

2. The LCD is designed to dynamically display the operation data and working status of the equipment.

3. Compatible with Seal, GEL, Flooded, LifePO4 battery charging

4. Dual USB 5V charging ports

5. 12V/24V/36V/48V automatic identification

6. Over-voltage protection

7. Over-current protection

8. Over temperature protection

9. 7 kinds of working mode selection

10. Controller parameters display (working mode, battery voltage, PV charging current, battery discharging current, product working temperature, delay time);

11. Some of the controller parameters can be modified by the user to set and save.

12, with backlight display

【7 kinds of working mode selection】

1.  Charging mode: in any case, never discharge.

2.  Light control mode: when the controller detects nights, it will delay ten minutes then start to discharge;   when it detects daytime, it will delay ten minutes then stop discharging.

3.  Light and time delay control mode: when the controller detects nights, it will delay ten minutes then start to discharge and count down, if the timer stops by zero, discharge will stop.   The longest duration of delay is 23:59.

4.  Universal control mode: under the trouble-free condition, it always keep discharging.

5.  Manual control mode: it uses “▼” for discharging or not.

6.  Timing control mode: it opens or closes the discharge regularly.

7.  Test mode: it is the same as light and time delay control mode but only loses ten minutes of time delay.

8.  The controller still discharges under low voltage protection.   Touch-holding “▼” for 5 seconds, discharge continues to output.   But discharge is only stopped by hand.   Notice that this performance may damage the battery, be careful with it!

Controller parameter:

MODEL:SY6048/SY8048/SY10048

Battery Voltage:12V/24V/36V/48V Auto

Charging Current:60A/80A/100A

Max Solar Input(Voc):

15-25V(12V Battery);30-50V(24V Battery);45-75V(36V Battery);60-100V(48V Battery)

Maximum PV Input power:

60A:720W(12V Battery);1440W(24V Battery);2160W(36V Battery);2880W(48V Battery)

80A:960W(12V Battery);1920W(24V Battery);2880W(36V Battery);3840W(48V Battery)

100A:1200W(12V Battery);2400W(24V Battery);3600W(36V Battery);4800W(48V Battery)

Solar charge controller with the most advanced MPPT control algorithm and the maximum power point of the pv array can be quickly tracked in any environment so that it can get the maximum energy from the solar panel and significantly improve the utilization of energy in solar system. It can be used in communication base station, home power supply system, traffic light, solar street lamp, courtyard lamp systems, etc.

60A Solar Charge Controller 12V 24V 36V 48V Battery Regulator Adjust Parameters

【Technical Specifications】Y&H This 60A solar charge controller automatically detects 12V, 24V, 36V, 48V DC system voltage. Its maximum photovoltaic input open circuit voltage is 100V, maximum photovoltaic input power is: 720W for 12V batteries, 1440W for 24V batteries, 2160W for 36V batteries, and 2880W for 48V batteries.Built-in dual USB outputs of 5V/2A (max), which can be used for charging your mobile cell phone, tablet PCs, and small fan appliances.

【Multiple Protection]】The solar regulator has undervoltage protection, overvoltage protection, overcharge protection, overload protection, overcurrent protection, overheating protection, short circuit protection, anti-reverse discharge, solar panel and battery reverse connection protection; perfect charging and discharging self-protection and self-recovery function. The use of natural convection cooling, quiet and silent.

【Compatible with a variety of battery types】The solar controller is compatible with all types of 12V/24V/36V/48V lithium-ion and lead-acid batteries, including SEL, USE, FLD, GEL, LiFePO4 and ternary lithium batteries, etc.; support for user-defined batteries, easy to select the battery, and at the same time can be calibrated battery voltage.

【High Definition Display】This solar controller is equipped with a large LCD display, which provides a full view of the real-time charging and discharging status. The solar regulator monitors the solar panel charging voltage, charging current, battery voltage, power generation, temperature and error codes in real time.

【PWM Charging Technology】 Y&H's solar controller adopts intelligent three-stage PWM charging technology, which can efficiently and safely charge the battery through the three-stage charging mode, preventing the battery from being overcharged or over-discharged. Combination of solar light control and time control, free to adjust the load enabled hours: light control, light time control

Features:

1：Large LCD display screen

2：One screen full view of real-time charging and discharging status

3: Rich load self-management work mode

4: Perfect charging and discharging self-protection and self-recovery function

5: Equipped with lithium special charging program

6: Intelligent three-stage PWM charging system

7: USB 5V 2A dual output interface

8: 12/24/36/48V full-stage automatic identification

9: Battery 0 voltage, solar panel side start

10: Inverted phase light control mode, dark out, dawn open, light control, light time control.

11: 7 days history view

Shipping Policy:

1. Items are usually shipped 1-3 business days after payment has been received.We do not ship on weekends and holidays

2.Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.

3. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive the item after 30 days, please contact us, we'll investigate and solve the delivery problem.

4.International buyers are responsible for duties and customs fees.We are not responsible for any customs duties or import taxes (if any)

5.Buyer from remote area should pay 35 USD more for the remote delivery service.(Only for Business Express )

Payment Method:

1. Payment methods accepted : Paypal only.

2. All major credit cards are accepted through our secure payment processor PayPal.

3. Payment must be received within 4 business days of auction closing.

4. We only ship to the confirmed address provided by ebay. Before you pay, please make sure your address in ebay matches the address you would like us to ship to.

Returns Policy:

1.One Year Warranty. Buy with confidence!

2. Refund or replacement request is available only requests within a week after parcel received & returning the item as the same condition as received.Please include your eBay ID and brief description of defective problem in your return package.

3. Defective situation must be noticed within 7 days after delivery.

4. Buyer must pay the return postage for any return reason.In return,we will pay the shipping fee for send it back to you.

5.Replacement or refund will be issued after the items are recevied by us in good condition.

Feedback:

1.We maintain all excellence 5 star DSR and strive for 100% customer satisfaction! Feedback is very important to us.  

2.Please do not give us any bad feedback. Or contact us before you open a case. If you can do as we say, we will be very grateful.Please give us the opportunity to resolve any problem.

Duties:

1.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's' customs office to determine what these additional costs will be prior to bidding/buying.

2.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up, do not confuse them for additional shipping charges.

3.Custom holds and delays vary from country to country and are beyond the control of the seller. Please do not hold us responsible for delivery delays caused by customs related issues. Thank You!