Description
2000W DC 12-48V ZVS Induction Heater Module Induction Heating Machine with 24V Cooling Fan for DIY
Product Parameters:
- Voltage: DC 12-48V
- Size: 185 x 83mm/7.3 x 3.3"
- Current: 6-8A (standby)
- Fan: DC 24V
- Protection: None
- Power: 2000W
Recommended Power Supply:
- Voltage: DC 48V
- Current: 50A
- Power: 2400W
Package Included:
- 1 x Motherboard with Fans
Note:
- Heating coil and batteries are not included.
How to Use:
- VCC: The positive pole of power supply (24V over 10A, 48V 50A, not using lead-acid batteries)
- GND: The negative pole of power supply
- Fan: single 24V; It is 48V after series
- Drive output: OUT put_A and OUT put_B
- Make an induction coil: Before winding the coil, a copper pipe can be wrapped with a waxy yellow tube sleeve to prevent short circuit when heating. Use a 4-5mm (0.2") diameter copper pipe to wind the coil. Give 8-10 turns (40-60mm/1.6-2.4" in diameter) to the coil for 24-48V. Around 13 turns for 53V. The higher the number of turns, the less power
Attention:
- Do not apply power without connecting a coil or flyback transformer.
- It is best to connect an air switch between its power supply and ZVS module to prevent excessive current from causing power protection when the power supply is turned on.
- The first time you use it, please connect the coil and power it on for 5-10 seconds, and then touch to check whether the heat sink is very hot (if the power is too large, the power supply will be overloaded and the heat sink will seriously heat up). If it is too hot, please increase the number of turns.
- Using high power (over 1000W), the copper pipe should be cooled by water.
Tips:
A 36V 30A power supply is recommended for induction heating, because the power of 12V power supply is too small, resulting in almost no reaction of heating. In addition, heating via a 12V power supply can easily lead to a decrease in the output voltage of the power supply, and it is dangerous to use when the voltage is below 12V.
Product Parameters:
- Voltage: DC 12-48V
- Size: 185 x 83mm/7.3 x 3.3"
- Current: 6-8A (standby)
- Fan: DC 24V
- Protection: None
- Power: 2000W
Recommended Power Supply:
- Voltage: DC 48V
- Current: 50A
- Power: 2400W
Package Included:
- 1 x Motherboard with Fans
Note:
- Heating coil and batteries are not included.
How to Use:
- VCC: The positive pole of power supply (24V over 10A, 48V 50A, not using lead-acid batteries)
- GND: The negative pole of power supply
- Fan: single 24V; It is 48V after series
- Drive output: OUT put_A and OUT put_B
- Make an induction coil: Before winding the coil, a copper pipe can be wrapped with a waxy yellow tube sleeve to prevent short circuit when heating. Use a 4-5mm (0.2") diameter copper pipe to wind the coil. Give 8-10 turns (40-60mm/1.6-2.4" in diameter) to the coil for 24-48V. Around 13 turns for 53V. The higher the number of turns, the less power
Attention:
- Do not apply power without connecting a coil or flyback transformer.
- It is best to connect an air switch between its power supply and ZVS module to prevent excessive current from causing power protection when the power supply is turned on.
- The first time you use it, please connect the coil and power it on for 5-10 seconds, and then touch to check whether the heat sink is very hot (if the power is too large, the power supply will be overloaded and the heat sink will seriously heat up). If it is too hot, please increase the number of turns.
- Using high power (over 1000W), the copper pipe should be cooled by water.
Tips:
A 36V 30A power supply is recommended for induction heating, because the power of 12V power supply is too small, resulting in almost no reaction of heating. In addition, heating via a 12V power supply can easily lead to a decrease in the output voltage of the power supply, and it is dangerous to use when the voltage is below 12V.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Jan 10, 2024 at 04:23:36 PST, seller added the following information: