Description
 
SPEEDLINK SE1002 100M Automotive Ethernet Interface Module w/ Aluminum Alloy Shell 100baseT1 to RJ45

Introduction:

SE1002: T1 and RJ45 only support 100M.

 



Features:
- Small size, all aluminum alloy, sandblasted surface and comfortable feel
- Marvell PHY chip is used to implement 100M BASE-T1 and RJ45 interfaces
- Provides 2 kinds of power interfaces: Type-C and DC interfaces. DC port supports 5V-32V power supply to input and is compatible with vehicle power supply, common for cars and trucks
- Software is continuously updated through Type-C port
- Working environment: -40 to 65°C
- Size: 26 x 26 x 84mm/1 x 1 x 3.3"


Interfaces:
From left to right:
- RUN indicator light (red);
- Link indicator light (green, semi-circular hole);
- T1 (N and P);
- Power interface (+ and -);
- DIP switches; the 1G 100M DIP switch is not valid for 100M products, and the rightmost DIP switch is the Master (M) and Slave (S) configurations.

Indicator Lights:
- Red indicator light: During normal operation, the Run indicator is flashing.
- Green indicator light: indicator of T1 connection and communication. There are three status:
● When it is not connected, the green light goes off
● When the connection is successful and there is no data, the green light will stays on
● When there is data communication, the green light will flash

Power Interfaces:
- DC power interface: the input range is 5~32V, less than 2W.
- Type-C power interface: 5V, less than 0.5A;
- You can choose one of the above two power interfaces.

DIP Switches:
DIP switch 1: rate selection (the DIP switch is not valid for SE1002)
- ON is 1000M (1G) mode
- OFF is 100M mode

DIP switch 2: master and slave mode selection
- ON is Master mode
- OFF is Slave mode


RJ45:
- RJ45 of SE1002 is fixed to 100M.
- RJ45 with indicator lights:
* Green indicator stays on: 100M mode linkUP;
* Green indicator is flashing: 100M mode Activity;
* Yellow indicator stays on: 1000M mode linkUP;
* Yellow indicator is flashing: 1000M mode Activity.

Type-C Port:
- Type-C power interface: 5V 0.5A required

Package Included:
- 1 x SE1002
- 1 x 4Pin connector with 30cm/11.8" cable
- 1 x DC 12V 1A power adapter  
- 1 x Type-C data cable

Packaging Details:
- G.W.: 0.6kg

Payment Terms
 
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
 
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
 
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
 
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
 
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.


On Jan 23, 2024 at 06:55:25 PST, seller added the following information:

DataCaciques