24" 600mm Acrylic Plastic PVC Sheet Bending Machine Heating Heater Bender 800 W
24" 600mm Acrylic Plastic PVC Bending Machine Heater Hot Heating Bender 800W
Specifications:
Input voltage: AC 220V
Heating peak: ZW-300 420 ℃, the other 250 ℃
Bending material thickness: 1mm-6mm
Heating width: 10-60 cm
Power: 800W
Package Dimensions (L x W x H): 87*20*12cm
Fetures:
Temperature adjustable- Product temperature is uniform, water circulation cooling.
Portable - Light and practical. Space-saving, hot bending of plastic sheets of various materials, such as thickness more than 6 mm
Can be heated up and down simultaneouslyby two heaters
Can be combined with multiple heaters to heat multiple bending points at one time;
If bending thick plates, slotting bending, bending angle will be more beautiful, you can adapt to local conditions, flexible use.
Can be combined with the worktable into a hot bending machine, can also be used alone.
There iswater circulation cooling on both sides of the heating tube to ensure that there will be no thermal deformation except where heating is needed.
Power supply and water pipe are connected at both ends respectively. Hydropower separation issafe and intuitive, easy to plug and pull, convenient to collect, and easy to assemble with the workbench.
Main uses:
Widely used in decoration engineering, sign making, display cabinets, aquarium wrapping, lighting LED channel letters, supermarket shelves, curtain walls, large light boxes, etc
Applicable materials:
acrylic, organic board, PVC and various thermoplastic materials
Packages:
1 X Acrylic PVC Bending Machine Heater
1 X Water Pump
2 X Silicone Tubes
1 X Temperature Controller
1 X Water Thermometer
Instructions:
Keep a cooling tank (barrel) of more than 30 liters. First, connect the heater body and the submersible pump with a silicone hose. Place the submersible pump in the cooling bucket, connect the power supply of the pump, and wait for the water to circulate out. (Note: The water temperature of the machine will keep rising for a long time. Please replace the cold water clearly. The temperature of the circulating water should not drop abruptly. When the water temperature exceeds 50 degrees, the power supply of the heater should be cut off in time, and the circulating water should be replaced later.)
Connect the thermostat with the hot bender and connect it to 220V power supply. Adjust the knob of the thermostat controller. The clockwise direction is to raise the temperature, and vice versa. When adjusting, it is not appropriate to rotate too fast in order to avoid damaging the thermostat. (Note: It is advisable to slowly adjust the thermostat to a reddish heat pipe. Excessive temperature will cause damage to the hot bending material and affect the service life of the hot bender).
When the heating pipe reaches the required temperature, it can place the plastic sheet which needs to be hot-bended on the heating trough. When the sheet is soft enough to be folded manually, it can bend at various angles. According to the different materials, the setting time is different. Please determine the setting time according to the actual situation.
Safety precautions:
Product heating produces high temperature, heating components should avoid contact with human skin.
Please pay attention to the use of the environment, away from inflammable and explosive goods.
If you don't use it for a long time, please cut off the power in time.
If you have any questions, please feel free to contact us and we will get back to you as soon as possible, thank you for your support.
If you have any question , please contact us , and we will reply you as soon as possible.
If you have any question , please contact us , and we will reply you as soon as possible.
We accept PayPal and bank transfer.
All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it. We accept Credit Cards via PayPal.
2-5 working days to:UK
5-7 working days to:France ,Germany ,spain ,Italy
6-10 working days to:Other countries
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Please keep the original box or packaging within 15days since item received. Returned item must come with original box or packaging.
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
- Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
- Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
- Please contact us with ebay message.
- Please feel free to contact us if you have any questions.
