1. Product Specifications:
Interface type: M.2 NVME USB3.2
Transfer Rate: Up to 10Gbps
Case Size:114*38*12mm
Material: Aluminum alloy
Cable Type: Type-C to Type-C
Cable Length: 150mm
Support SSD Drivers with Sizes:2230, 2242, 2260, 2280mm.
Color: Grey
2. Features:
1. USB 3.2 Gen 2 Type-Cextreme fast and high-capacity data transfer solution, Data transfer rate up to10Gbps.
2. It supports NVMEPCIE-based M.2 SSDs.
3. Easy installation &no driver required, no additional power required.
4. It supports Plug &Play and Hot-Swapping.
5. Support for multipleoperating systems: Windows, Mac OS & Linux.
3. Package Included:
1 x M.2 NVME USB 3.2 Type-CSSD Enclosure
1 x USB 3.2 Type-C to Type-CCable
1 x USB 3.2 USB-A to Type-CCable
2 x Thermal pads
1 x Screw Set
4. Please note that it only supports NVME SSD ONLY (NOTsupported by SATA SSD).
We tested our enclosure withSumsung 970 EVO NVMe SSD, and the actual speed can reach 1000 MB/s on R/W.However, please ensure that the Laptop TYPE C port also complies with USB3.2Gen 2 (10Gbps). If USB3.1 Gen 1 (5Gbps), then the speed will only be half that.
5. For the brand-new SSDdrive, it may not be found, so please format it before using it for the firsttime. Please format it to match the type that Windows and Mac support.
Following steps is the way to find the brand new ssd drive:
1. Use your mouse right keyto click "Computer", it will show a drop-down menu;
2. Use your mouse left keyto click "Computer Managment";
3. Use your mouse left keyto click "Disk Management”;
4. After find the brand new ssd drive, pleaseformat it, and made partition. Then you can find the drive normally.
【Applicable SSD】- SSK M.2 NVME SSD Enclosure is compatible with NVME PCIe M Key connectors SSD for sizes: 2230/2242/2260/2280. It is not compatible with B Key and B+M Key Connectors. It does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Compatible with M.2 NVMe PCIe M Key Only. Note: NVMe SSD not included
【Aluminum Alloy Shell】- Features a sleek and durable aluminum shell for optimal heat dissipation and portability. Includes 2 thermal pads and both USB 3.2 Type-C and USB 3.2 (Type-A) cable
【Tool-Free Design and Speed】- 100% Tool-Free, quickly install and remove SSDs without any tools. M.2 NVME USB3.2 Gen2 Transfer speed is up to 10Gbps. Thunderbolt 3 compatible. One HD movie transfer only takes 2 seconds; Backward compatible with USB3.1 Gen1 and USB3.0 at respective speed limits. Thunderbolt 3 compatible
【Blue Indicator】- Blue Indicator shows the data transfer status, easy and clear; SSD file system must be supported on host operating system to be accessible. As with all SSDs, new media must be formatted before use
【High Quality Master Chip】- Adopts high performance controller IC Chipset JMS583, Complies with UASP, Trim which can effectively improve the speed and extend the lifetime of SSD. Plug-and-play, no additional drivers required. Bus powered, does not need an external power supply. Compatible with Multi OS, Windows 7/ 8/ 8.1/ 10/ Linux/ MAC
Please take care to check if your SSD is M.2 PCIE NVME otherwise it will not work. Please contact us if you are not sure if it is the right one. We will do our best to help you