Main Functions:

1.Drive test ignition coil:including independent ignition,coil type,Module Type.

2.Drive test fuel injector:including gasoline-powered car 12V fuel injector.

3.Drive and test solenoid valves and fuel metering valves controlled by various duty ratios.

4.Drive and test motors controlled by various duty ratios,urea pump motors,etc.

5.Drive and test idle stepping motors,instrument stepping motors,headlight follow-up steering stepping motor and so on.

6.Built-in PWM Signal Adjustable  output frequency,amplitude and duty ratio.Used to simulate various duty  cycle sensors,such as air conditioning pressure sensor(duty cycle  type),

air flowmeter(duty cycle type),etc.

7.Power supply voltage:12V,with reverse connection protection,overcurrent protection.

Support to adjust:

1.Electromagnetic coil driving current range: 0-10A

2.Output frequency range: 1HZ-100KHZ

3.Duty cycle range: 1%-100%

4.Signal Voltage Range: 0.1V-10V (Depend on different motor)

5.Rheostat‘s resistance range: 0-10kΩ

6. You can test ≤12V Motor, include the motor of vehicle ,Motorcycle,Toy, Alarm, Instrument...

7. Cann't test 2P ignition coil.

You can choose the page you need to test and adjust the range you need.

Square wave: 1-100Khz  ,amplitude 5/10V, can automatically read the resistance value of  rheostat, and display the output analog resistance of rheostat during  regulation;

Sine wave: 1-100Khz,  amplitude 5/10V, can automatically read the resistance value of  Rheostat, and display the output analog resistance of Rheostat during  regulation;

Solenoid valve: 0-10A control relay open/close (driven part voltage can be customized by user);

Accelerator:A/B=1:2  , A-channel voltage up to 2.5V, B-channel voltage up to 5V, for dual  synchronization coefficients output analog signals (can also be used  separately);

Oxygen sensor:1V or 5V analog signal output;

Common rail signal: analog rail pressure output, interface with rail pressure corresponding pressure and analog signal voltage parameters;

Stepper motor:4-wire 12V stepping motor drive, maximum power 6W (500mA);

Throttle:A+B=5V, used to output analog signal with dual synchronization coefficients (can also be used separately).

Operation:

1. Connect to 12V power supply.

2. Press the direction button to choose the content you need to enter.

3. "<" & ">" can rotate the motor or  make it stretch out and draw back.

How to adjust the Rheostat:

1. Long press "√"+Rotate the knob of Rheostat in the same time.

2. Screen Shows real-time data (resistance value).

3. Get the resistance value(Ω) you need.

package list:

1.Main unit*1

2.Adapter board adapter *1

3.2P/3P/4P Terminal adapter *3

4. Motor 4P Connector *1

5.Probe *5 (2mm)

6.12V-24V Power Supply Connector *1

( Input: 12V-24V with reverse connection protection & overcurrent protection, MAX Output Voltage: 12V )