- Condition: 100% new
- Color:Black
- Material: Plastic
- Size: approx.7.8x2.9cm(3.07x1.14inch)(LxW)
- Image Sensors: 1/4 "CCD color
- TV System: NTSC and PAL
- Effective Pixels: 728 x 512
- Resolution: 520 TV Lines
- Video Output: 1.0Vp-p, 75
- Electronic Shutter: 1/60 (NTSC) -1/10000 s, 1/50 (PAL) -1/10000 s
- Waterproof Grade: IPX 68
- Operating Temperature: -20~ + 80 degrees Celsius, RH95%
- Working Power (DCV): 12
- Current Consumption: 90mA max
- Item included:
1 x CCD Car Rear View Camera
1 x 6 m Video Cable
1 x Power Cable
1 x User Manual
- Compatible With:
Fit for VW New Beetle 2006-2010
Fit for VW PHAETON 2002-2010
Fit for VW PASSAT 4D 2006-2009
Fit for VW SCIROCCO 2009-2010
Fit for VW POLO(2C) 2000-2010
Fit for VW Golf / Variant / 4Motion 2004 above
Fit for VW Passat CC
Fit for VW Bora
Fit for VW Golf 4/5/6
Fit for Seat Leon/Leon4 2006 above
Fit for Seat Altea 2007 above
Fit for Skoda Superb
This Is Aftermarket Replacement Item But Not Genuine
- Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
3) Just For Reference. Please Make Sure That The Part Number Matches Your Existing One Before Purchasing.
Product Dimension:
Feature:
1) The image color is high definition and more realistic.
2) The viewing angle is 170 degree, and the reversing is safer.
3) Reversing reference line (optional electronic ruler line), the obstacle distance is clear at a glance.
4) Digital sensor chip processing, the night vision effect is obvious.
5) Multi-layer waterproof design, truly high pressure washing and soaking waterproof.
6) Installed at the rear handle and license plate light, equipped with screws and washers.
7) The video cable is connected to the monitor, and the power cable is connected to the taillight power supply. When the vehicle is reversed, the reversing monitoring system automatically starts working, and the situation behind the car can be clearly seen.
Setting:
1) Set the camera to your car's license plate area.
2) Adjust the camera lens to its best position.
3) Connect the power wire (red and black) to light power wires of your car.
4) Connect the video (yellow) to the display.
