TONE 1/2 sq.dr Digital Torque Adaptor Measuring Unit 20-200N.m H4DT200
Description
Ability range (minimum ~ maximum): 20 ~ 200N / m
Display unit: N / M
Torque accuracy: Plus or minus 3%
Insert angle: 12.7mm
Output angle: 12.7mm
Battery used: AA 4 type x 2 alkaline batteries
Used temperature range: 5 to 42 degrees
Brand: Tone (Tone)
Product model number: H4DT200
Packing size: 13.9 x 11 x 5.8 cm; 184 g
Nameplate surname: h4dt200: Insert angle: 12.7mm (1/2 "), 20 ~ 200N/m
Material: ABS
Wallpaper pattern / pattern: Single item
Torque: 200 Newton Meters
Accessories: None
Battery attached: No
Guarantee: Nothing in particular
Product weight: 184 g
Product description
It is a digital torque measuring instrument that is used by attaching it between the ratchet handle, spinna handle, etc. between the sockets.
It supports both left and right rotation directions, and can switch between two types of measurement modes (peak mode, track mode).
When approaching the target torque, the buzzer sound (intermittent) is notified. Buzzer can be set within 50-95%of the target torque.
With a calibration certificate proving that it was calibrated using a traced practical standard device based on national standards.
Note) It cannot be entered with power tools.
Display unit: N / M
Torque accuracy: Plus or minus 3%
Insert angle: 12.7mm
Output angle: 12.7mm
Battery used: AA 4 type x 2 alkaline batteries
Used temperature range: 5 to 42 degrees
Brand: Tone (Tone)
Product model number: H4DT200
Packing size: 13.9 x 11 x 5.8 cm; 184 g
Nameplate surname: h4dt200: Insert angle: 12.7mm (1/2 "), 20 ~ 200N/m
Material: ABS
Wallpaper pattern / pattern: Single item
Torque: 200 Newton Meters
Accessories: None
Battery attached: No
Guarantee: Nothing in particular
Product weight: 184 g
Product description
It is a digital torque measuring instrument that is used by attaching it between the ratchet handle, spinna handle, etc. between the sockets.
It supports both left and right rotation directions, and can switch between two types of measurement modes (peak mode, track mode).
When approaching the target torque, the buzzer sound (intermittent) is notified. Buzzer can be set within 50-95%of the target torque.
With a calibration certificate proving that it was calibrated using a traced practical standard device based on national standards.
Note) It cannot be entered with power tools.