Model: A76


Light bulb: 30W LED+18LED (10 * LED white light+4 * LED red light+4 * LED blue light)


Product size: 16.5 * 4.1 * 2.8cm


Net weight: 132G


Box size: 17.3 * 4.7 * 4.7cm


Gross weight: 150G


Material: aluminum alloy+ABS


Switch: Press the switch


Battery: Built in 2600 mA 18650 battery


Charging method: Type-C USB charging


Gear: Main light 3rd gear: Strong light - weak light - fast flashing long press to switch to side lights 10 * LED strong light


Side lights in 5th gear: 10 * LED strong light -10 * LED weak light -4 * LED red light -4 * LED red light -4 * LED blue light flashing alternately


Zoom mode: Telescopic zoom


Waterproof grade: IPX4


Lumens: 800 lumens


Range: 1000-1500 meters


Additional function: multifunctional overcharge protection


Features: Strong light remote beam with side lights and battery display, equipped with tail rope and pen clip, convenient to carry and meet various scenarios


Indicator lights: Four blue LED power indicator lights


Charging time: 4.5-5 hours


Discharge time: 5-6 hours


Package includes: flashlight+tail rope+USB cable+color box packaging


Box gauge: 51 * 36 * 31cm

Instructions for use:

1. Check the battery: Ensure that the battery is charged and install the flashlight in the correct direction

2. When using a flashlight, choose according to the voltage and battery requirements of the flashlight. Do not use it indiscriminately to avoid burning the circuit board. Do not use batteries of different models and voltages at the same time;

3. In use, when there is a significant change in the brightness of the flashlight, it should be turned off to prevent excessive discharge of the battery, and charged in a timely manner. Pay attention to the waterproof, moisture-proof, and anti drop measures of the battery, and charge according to the charging speed of the charger. After the indicator light changes, take it out in a timely manner and do not overcharge;

4. Batteries that have not been used for a long time should be fully charged and maintained, and charged and discharged again after about three months to avoid chemical corrosion;

5. Keep the inner wall of the lamp cup clean and never wipe it with hands or hard objects. Remove fingerprints from the lens and gently wipe it with a cotton swab dipped in lens cleaner;

6. Do not expose the flashlight to sunlight, water, chemicals, and corrosive gases for a long time to avoid damaging the flashlight;

7. Non professionals are not allowed to disassemble the flashlight to prevent damage to the circuit board

Precautions:

1. It is not allowed to directly illuminate the eyes to avoid causing damage to the eyes

2. Do not use under excessive pressure, the voltage should not exceed 4.2V, and the battery should not be reversed. Otherwise, it will burn out the circuit board;

3. When charging, please identify the positive and negative poles of the charger and do not overcharge or discharge the battery to avoid damaging its service life (charging time is usually 5-8 hours);

4. When using a flashlight, check that all screws are tightened without looseness, otherwise it may cause a lack of brightness or slight brightness;

5. Flashlights should be avoided from being placed in sunlight or high temperature environments. After stopping use, please remove the battery, fully charge it, and store it in a cool and dry place; Flashlights have waterproof capabilities for daily use, and generally do not cause problems in rain, but do not have diving function. Do not carry flashlights for diving or keep them in water basins or bathtubs for a long time;

To maintain smooth rotation of the O-ring (sealing rubber ring) and screws, please wipe the surface with petroleum jelly oil 2-3 times a year.

Charging attention: If there is insufficient, it should be replenished in a timely manner to avoid affecting the battery life. During long-term storage, the battery should also be charged.