Kit # 1:- 1 x 15mm push-fit copper pipe adaptor with a 1/4" water pipe reducer fitting, to make your initial connection to the water supply and to connect the 1/4" water pipe.

* 5 metres of 1/4" water pipe.

* 1 x 1/4" x 1/4" shut off valve, this will enable you to service your appliance, easily shutting off the 1/4" supply. 

* 1 x 1/4" straight connector to join the water pipe that comes from the back of your fridge to your new water pipe.

Kit # 2:- Self cut saddle valve to connect into an existing 15mm copper pipe.

Valve to 1/4 inch pipe adaptor.

 * 5 metre length of 1/4 inch pipe   including nail clips.

* 1/4 inch pipe to pipe connector.

Kit # 3:- 5m length of 1/4" pipe.

* 3/4" BSP to 1/4" Push Fit Screw in Adapter.

* 1/4" Inline Ball Valve.

* 1/4" Straight Connector.

* 1/4" Elbow.

* 1/4" Tee Piece.

Kit # 4:- 5 meters of white 1/4" fridge water pipe.

* 3/4" inline connector + 1/4" valve to isolate water when changing the filters.

* 1/4"x1/4" Straight push- fit connector to connect to the pipe on the fridge.

Kit # 5:- 5 meters of 1/4" fridge water pipe.

* Self Piercing Pipe Feed Valve.

* 1/4"x1/4" Straight push- fit connector to connect to the pipe on the fridge.

* 1/4"x1/4" inline push- fit valve to isolate water when changing the filters.

Kit # 6:- Lever operated 15mm shut off valve to connect to your existing standard 15mm copper pipe.

* 5 Metre length of 1/4" tubing. You may receive white colour tube instead of Blue.

* Nail - in pipe clips × 12.

* 3/4" BSP × 1/4" Female adaptor to connect between above mentioned valve and the 1/4" tubing.

* 1/4" inch NPT straight male adaptor to connect into the threaded inlet on the fridge using PTFE tape. (not included).

Kit # 7:- 10 Metre length of 1/4 inch tubing.

*15 × Nail in pipe clips.

* 15mm tee valve.

* 3/4" BSP x 1/4 inch adaptor.

* 1/4"  Straight connector.

Kit # 8:- 5m length of 1/4" pipe.

* 1 x 1/2" Screw thread 1/4" tube Push Fit Straight Screw in Adapter.

* 1 x 1/4" Elbow.

* 1 x 1/4" Straight Connector.

* 1 x 1/4" Inline Ball Valve.

* 1 x 1/4" Tee.

Kit # 9:- 5 meters of tube white 1/4".

* 1x 1/2" Screw thread x1/4" push- fit connector.

* 2 x 1/4"x1/4" Straight push- fit connector.

* 2 x 2" mounting clips for filter.

* 1x 1/4"x1/4" inline push- fit valve to isolate water when changing the filters.

* 1x In-line Fridge water filter.

Any questions please don't hesitate to contact me. 

Have a look my other items for sale you might be interested!

Please make sure you select correct requirements you need as there's NO Returns OR Refund available for any items.