Specifications:

• The conductive resonant wire is cold drawn multi-strand copper wire 2.5mm square.
• Length of antenna wire is 39.6m (130 ft)
• There is also included a 20m rope for installation.
• Sturdy Balun with 64:1 winding.,No need for tuning,Connector: SO-239
• Frequency :8-band natural resonance 80m, 40m, 30m, 20m, 17m, 15m, 12m, 10m.
• SWR≤ 2 all bands
• Power: SSB , CW is 150 Watts.Maximum Power for FT8, FM, AM, FSK is 100 Watts.
• Best performance when kept 3m away from buildings and the ground

Antenna Erection:

The end-fed Half Wave antenna(EFHW) has low requirements for erection, and it can work normally if it is more than 3m away from the ground. In order to achieve a desired effect, it should be as high as possible and as open as possible When the antenna is erected vertically, the communication is far away due to low elevation angle, that is, it is equivalent to an omnidirectional antenna. When erected horizontally, due to high elevation angle and close communication, it also has a certain directional city.

Packing:

End-fed balun x 1, Storage bag x 1; Antenna array about 39.6m (130 ft) x 1; rope for installation 20m/65.6ft x 1

Remarks: Depending on the installation environment, a slight adjustment may be required to obtain the lowest SWR.

Grounding at the Balun or end of the coaxial cable is recommended for the protection of your equipment from an electrostatic buildup in order to prevent ESD- electrostatic discharge.

Please pay attention to safety when installing.