Free eBay listing template designed by dewiso.com

1/2 HP Submersible Sump Pump, Clean/Dirty Water Pump 2100GHP with Float Switch for Pool Draining, Hot Tub, Flood Drain 15ft cord

细节4

Specification

This pump is used primarily as Cellar pump. it's provides protection from flooding.They are also used whenever water has to be moved from one place to another, e.g.in the home, agriculture, horticulture, plumbing and many other applications.

Cleaning the impeller ： If excessive deposits collect in the pump case you must dismantle the bottom part of the pump as follows:

1. Undo the 4 screws from the bottom of the intake cage.

2. Remove the intake cage from the pump case.

3. clean the impeller with clear water.

4. Assemble in reverse order


Multi Outlet There with 3 different outlet (1 inch ,1-1/4 inch, 1-1/2 inch ) , can choose from according to the flow rate , The bigger the flow is, the wider the outlet should be.	Handle Grip There is an air vent on the pump so when the pump is working, there will be water leaking out from here, this is a normal phenomenon, please do not care	Auto Float Switch When the water level rises above the pump, the pump will automatically start working under the control of the float switch. When the water level is below the pump, you should lift the float for pumping. Note: Once the pump fails to pump water, you should immediately lower the float switch or cut off the power. Otherwise, it will cause the coil to burn out.	Base Plate A certain height of the base can avoid other impurities being sucked into the impeller when the pump is working.

细节3

细节4

Multi Outlet

There with 3 different outlet (1 inch ,1-1/4 inch, 1-1/2 inch ) , can choose from according to the flow rate , The bigger the flow is, the wider the outlet should be.

Handle Grip

There is an air vent on the pump so when the pump is working, there will be water leaking out from here, this is a normal phenomenon, please do not care

Auto Float Switch

When the water level rises above the pump, the pump will automatically start working under the control of the float switch. When the water level is below the pump, you should lift the float for pumping. Note: Once the pump fails to pump water, you should immediately lower the float switch or cut off the power. Otherwise, it will cause the coil to burn out.

Base Plate

A certain height of the base can avoid other impurities being sucked into the impeller when the pump is working.

About this item

【Kindly Tips】 : When you start use the pump you must be submerged into the water at a slight angle to allow the remaining air to escape .
【Kindly Tips】There is an air vent on the pump so when the pump is working, there will be water leaking out from here, this is a normal phenomenon It’s not that the pump is damaged.
【Muti Outlet Water】：There have 3 different outlet (1 inch ,1-1/4 inch, 1-1/2 inch ) , can choose from according to the flow rate , The bigger the flow is, the wider the outlet should be.
【Powerful Sump Pump】: Equipped with 1/2HP power motor can deliver up to 2500GPH and max delivery height can be reached 16 feet . Suitable for ponds, swimming pools, sprinkler systems, irrigation systems, gardening, rain buckets, flooded basement, large aquariums .
【Auto Float Switch】: When the water level rises above the pump, the pump will automatically start working under the control of the float switch. When the water level is below the pump, you should lift the float for pumping. Note: Once the pump fails to pump water, you should immediately lower the float switch or cut off the power. Otherwise, it will cause the coil to burn out.