Notice: The picture does not represent the actual size of the machine, please refer to the actual size of the machine.

	Vyper	Kobra Go	🔥Kobra 2	Kobra	Kobra Plus	🔥Kobra Max	Kobra Neo
Printing Technology	FDM	FDM	FDM	FDM	FDM	FDM	FDM
Build Area	9.6" x 9.6" x 10.2"	8.7" x 8.7" x 9.8"	8.7" x 8.7" x 9.8"	8.7" x 8.7" x 9.8"	11.8" x 11.8" x 13.8"	15.7'' x 15.7''x 17.71''	8.7" x 8.7" x 9.8"
Materials	PLA, ABS, PETG, TPU	PLA, ABS, PETG, TPU	PLA, ABS, PETG, TPU	PLA, ABS, PETG, TPU	PLA, ABS, PETG, TPU	PLA, ABS, PETG, TPU	PLA, ABS, PETG, TPU
Leveling Type	25-point auto leveling	25-point auto leveling	LeviQ 2.0 auto leveling	25-point auto leveling	25-point auto leveling	25-point auto leveling	25-point auto leveling
Printing Speed	＜180mm/s (recommended 80-100mm/s)	＜100mm/s (Recommended 50-60)	＜250mm/s (Recommended 150)	＜180mm/s (recommended 80-100mm/s)	＜180mm/s (recommended 80-100mm/s)	＜180mm/s (recommended 80-100mm/s)	＜100mm/s (Recommended 50-60)
Extruder Type:	Separated Drive Extruder	Separated Drive Extruder	Direct Extrudert Double Gears	Integrated Direct Drive	Separated Drive Extruder	Separated Drive Extruder	Integrated Direct Drive
Control Screen	4.3" LCD Touch Screen	2.4" LCD Screen & Control Knob	4.3" LCD Touch Screen	4.3" LCD Touch Screen	4.3" LCD Touch Screen	4.3" LCD Touch Screen	2.4" LCD Screen & Control Knob
Platform Material:	PEI spring steel	PEI spring steel	PEI spring steel	PEI spring steel	Carborundum Glass	Carborundum Glass	PEI spring steel
Pre-Installed	✓	X	✓	✓	✓	✓	✓

Kobra 2 Series Parameters

• - ANYCUBIC Vyper -

  Vyper Upgrade Auto Leveling: ANYCUBIC Vyper is one of the very few 3D printers that has auto leveling feature, the intelligent leveling system equipped with 16-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate. Large Printing Size: ANYCUBIC Vyper 3D Printer comes with a large build volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 24.5 x 24.5 x 26cm, which leaves enough space and freedom to fully realize your fantastic creativity. Fast and Stable Printing: Compared with ordinary 3D printers, Vyper's max printing speed can reach 7.1 in/s / 18 cm/s, which save more time on waiting. High-precision double screw design makes printers run more stable operation and the patented Z-axis can avoid print layer marks, greatly improving the printing details and precision. Durable and Removable Magnetic Platform: ANYCUBIC Vyper's platform adopts a special coating combined with spring steel, you can remove the models easily with your bare hands simply by taking off the entire platform and then bend it. it can remain flat for decades, beside it's rust-proof and completely maintenance-free.Widely compatible with PLA/ABS/PETG/TPU filaments. Intelligent Resume Printing Function: Vyper 3D Printer supports automatically resume printing when Power off or the filament is insufficient or breakage, the sensor will pause printing to save time and avoiding material waste. More functions like double fan two-way heat dissipation, 4.3" LCD screen, Fast assemble, which greatly improved printing experience Tech Specs Machine Weight 10kg Machine Dimensions 516x508x457mm(HWD)  Print Resolution ±0.1mm Printing Dimensions  260x245x245mm(HWD) Positioning Accuracy X/Y 0.0125mm; Z 0.002mm  Extruder Number Single Nozzle Size 0.4mm Hotbed Temperature ≤230F/110℃ Printing Speed ≤180mm/s (recommended 80mm/s) Ambient Operating Temperature 8°C - 40°C Operational Nozzle Temperature ≤260°C Operational Hot Bed Temperature ≤110°C Input Voltage 100V/240V AC, 60/50Hz Output Voltage 24V/14.6A (350W) Printing Material PLA/ABS/PETG/TPU/Wood Input Formats .STL, .OBJ, .AMF Output Formats GCode Connection Mode Trans-flash Card; USB cable(expert users only)

   

  ---

  - ANYCUBIC Kobra Neo -

  Kobra Neo 90% Pre-installed Make It Easy: Anycubic Kobra Neo is a 90% Pre-installed 3D Printer, which make it possible to set up within 10 minutes. It can print perfectly right out of the box and this would make any beginner to be a great printer enthusiast, which is more suitable for beginners than other DIY 3D Printers. Direct Drive Extruder Make It Precise Control: The Direct Drive Extruder realizes smooth feeding and discharging of flaments and compatible with more flexible filament such as TPU/PLA/ABS/PETG. It is more lighter, features less inertia and more precise printing, can restore the form of the model to the greatest extent. PEI Spring Steel Platform Make It Easy Removal & Cost Saving: Compared with other FDM 3d printers, double-sided magnetic PEI spring steel platform is more durable and lasts longer, saving a lot of maintenance costs. You can remove the model easily. 25-Point Auto Leveling Make It Smart: Simple operation brings precise detection and fast leveling, helps you from the tedious manual leveling greatly. 34.4% Larger Creation Dimension Make It Large: Compared to the last generation Anycubic Mega S, the printing volume of Anycubic Kobra Neo has increased by 34.4% to reach 12.1 liters. The printing dimension is 250x 220x 220mm, equivalent to the size of a standard Size 5 soccer ball More Function: ①Make It Fast: Anycubic Kobra Neo 3d prints at a recommended typical speed of 50-60mm/s and reaches 100mm/s at its highest, which will save much time; ②Make It Smart: The standard power outage resuming sensor and the optional filament run-out sensor reduces filament waste and save time by avoiding the printing failure caused by the power outage and lack of filament. Customer Services: ANYCUBIC FDM 3d printers come with one-year warranty(The print head with 3 months, the heated bed with 6 months) and lifetime technical support. If you have any question on Anycubic Kobra Neo 3d printer, just click "Ask a question" through our page, we will fast respond within 24 hours Tech Specs Machine Weight 7.4kg Machine Dimensions 490x445x443mm(HWD) Printing Dimensions 250x220x220mm(HWD) Nozzle Temperature ≤500F/260℃ Nozzle Size ø 0.4mm (replaceable) Hotbed Temperature ≤230F/110℃ Average Print Speed ≤100mm/s(Max.) ≤60mm/s(Typ.) Zaxis Single threaded rod Control Panel 2.4" LCD screen Leveling Anycubic LeviQ 25-point precise leveling Printing Material PLA/ABS/PETG/TPU Filament run-out detection Optional Extruder Type Direct extruder Printing Platform PEI-coated metal sheet 220x220mm Memory Card Slot SD Card

  ---

  - ANYCUBIC Kobra -

  Kobra Modular Design & Easy Assembly: ANYCUBIC KOBRA is an all-in-one frame 3D printer, can minimize the shaking to improve the print quality. The modular design allows the printer to be assembled only in 10 minutes Intelligent Auto Leveling 3d printer: ANYCUBIC KOBRA captured with the Self-developed Anycubic LeviQ Leveling Function equipped with 25-point precise leveling up, which can compensate the unevenness of the heated bed automatically, to achieve easy, fast and precise leveling, providing you with a more intelligent printing experience. Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision. Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost. Fast Printing & Large Printing Size: ANYCUBIC KOBRA 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.7x8.7x9.84in / 220x220x250mm, which has enough space and freedom to realize your fantastic creativity. More Function: ①ANYCUBIC KOBRA is equipped with 4.3-inch LCD touch screen, which brings sensitive response and brighter display, offering better using experience; ②All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service. Tech Specs Machine Weight 7kg Machine Dimensions 486x486x430mm(HWD)  Printing Platform 220x220mm Printing Dimensions  250x200x200mm(HWD) Printing Speed 80-100mm/s  Average Printing Speed 50-80mm/s  Nozzle Size ø 0.4 mm (replaceable) Nozzle Temperature ≤500F/260℃ Hotbed Temperature ≤230F/110℃ Extruder Type Integrated short-range extruder Z-axis Single threaded rod Material Break Detection Optional Anycubic LeviQ Smart leveling, 25-point precise leveling Printing Platform PEI spring steel Control Panel 4.3 inch LCD touch screen Printing Material PLA/ABS/PETG/TPU

  ---

  - ANYCUBIC Kobra Plus -

  Kobra Plus Machine Leveling: 25-point auto leveling Extruder Type: Separated Bowden Print Resolution: ±0.1mm Positioning Accuracy: X/Y 0.0125mm Z 0.002mm Nozzle Diameter: ø 0.4 mm (Replaceable) Filament Dimensions: ø 1.75 mm Support Filaments: PLA / ABS / PETG / TPU Platform Material: Carborundum Glass Z Axis: Double Threaded Rod Slicing Software: Cura Input Formats: .STL, .OBJ, .AMF; Output Formats: GCode Connection Mode: MicroSD card Material Break Detection: Support Typical Speed: 100 mm/s Build Volume: 13.8 x 11.8 x 11.8 in. / 350 x 300 x 300 mm Machine Size: 23.8 x 22.0 x 21.5 in. / 605 x 560 x 546 mm Heated bed Temperature: ≤ 194 °F / 90 °C, Nozzle temperature: ≤ 500 °F / 260 °C

  ---

  ANYCUBIC Kobra 2

  Kobra 2 【Save Time with 5X Faster Printing】Anycubic Kobra 2 upgraded 3D Printer prints the same-sized model at a recommended speed, saving you up to 70% of printing time. The Maximum Print Speed is 250mm/s, Recommended Print speed is 150mm/s, Accelerated Speed is 2500mm/s². 【Fast and Precise Leveling】Brand new upgraded LeviQ 2.0 Automatic Leveling System in combination with tailored modular realize smart offset to the Z-axis without manual adjustment. Z-Offset can be customed to cater to various printing needs. 【Efficient and Precise Filament Delivery】Dual-geared extrusion structure accurately controls material delivery. Upgraded extruder power reaches up to 60 watts, quickly melts the filament in an enhanced flowability. 【Rapid Cooling and Fast Printing】With an optimized dissipation design, the cooling fan reaches up to 7,000rpm. This ensures rapid cooling down of the models and a fast printing experience. 【Stable Printing with Double Z-axis Threaded Rod】The Z-axis adopts a double-threaded rod structure, lessening the lifting resistance while printing. It flattens the building platform and reduces the printing layers, bringing excellent printing results even at a faster speed. 【Easy Modular Assembly】Assemble Anycubic Kobra 2 with ease in just 10 minutes with only 5 pieces to put together. 【Smarter Printing Experience】The 4.3-inch full-colored and sensitive LCD Touchscreen with comprehensive functions and settings offers a better printing experience. 【Excellent Customer Service】 Each Anycubic Kobra 2 3D Printer comes with a one-year warranty (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach us Tech Specs Machine Weight 8.4kg Machine Dimensions 19.1x173x171in/ 486*440*435mm(HWD)  Printing Volume 3.2gal./12.1L Printing Dimensions  9.8x8.7x8.7in./ 250x220x220mm(HWD) Nozzle Temperature ≤500F/260℃  Nozzle Size ø 0.4mm (replaceable) Hotbed Temperature ≤230F/110℃ Printing Speed 9.8in./s or 250mm/s(Max.)   5.9in./s or 150mm/s(Typ)  Zaxis Double-Threaded Rod  Control Panel  4.3" LCD Touch-Control Screen Printing Material PLA/ABS/PETG/TPU Power Button Power-Loss Recovery Data Input  MicroSD Card

   

  ---

   - ANYCUBIC Kobra Max -

  Kobra Max Large Build Size: ANYCUBIC KOBRA MAX 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily and household using, providing you larger printing space and more choices of creation. Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can compensate the heated bed unevenness automatically. Leveling and printing can be completed with one button, simple operation and brings you greater printing experience. Stronger Construction & Higher Precision: ANYCUBIC KOBRA MAX 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the shaking, does not lose steps and more model details can be restored. Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of filament, it will stop automatically without losing your printing progress. 100% Satisfaction Service: ANYCUBIC is one of the best 3d printer brands, which provide the best 3d printers for every customer. We also provide the lifetime technical support and 24 hours professional customer service Tech Specs Machine Weight 16kg Machine Dimensions 715x720x665mm(HWD) Printing Volume 19.02 gal./72.0L Printing Dimensions 17.7x15.7x15.7in./ 450x400x400mm(HWD) Nozzle Temperature ≤500F/260℃ Nozzle Size ø 0.4mm Hotbed Temperature ≤194F/90℃ Average Print Speed 80-100mm/s Zaxis Double threaded rod Control Panel 4.3" LCD touch screen Leveling Smart auto-leveling Automatically compensate the hot bed unevenness Printing Material PLA/ABS/PETG/TPU Filament run-out detection Support Extruder Type Bowden extruder

  ---

  - ANYCUBIC Kobra 2 Neo -

  Tech Specs Machine Weight 7.3kg Machine Dimensions 19.1x17.3x17.3in./ 485*440*440mm(HWD)  Printing Volume 3.2gal./12.1L Printing Dimensions  9.8x8.7x8.7in./ 250x220x220mm(HWD) Nozzle ≤500℉/260°C  ø 0.4mm (replaceable) Hotbed Temperature ≤230℉/110°C Printing Speed 250mm/s(Max.)   150mm/s(Typ.)  Z-axis Threaded rod x 1 Y-axis Rail x 1 Belt Tensioner Adjustable Button Filament Detection  Optional Machine Leveling  New Anycubic LeviQ 2.0 Automatic Leveling System (25-point) Printing Platform PEl Magnetic Spring Steel 8.7x8.7in./220x220mm Extruder  Integrated Direct Cooling Fan RPM  7000rpm/min Control Panel  2.4" LCD Knob-Control Printing Material PLA/ABS/PETG/TPU Data Input  MicroSD Card

  ---

   - ANYCUBIC Kobra 2 Pro -

  Kobra 2 Pro: 【10X Boost in Speed】Compared to mainstream FDM 3D printers, the printing speed is increased by 10 times. The maximum printing speed up to 500mm/s. Recommended print speed is 300mm/s. 【High Power Powerful Computing】Equipped with a high-performance Cortex-A7 1.2Ghz processor, providing abundant computing power for faster calculation and command execution, which results in 10x faster printing. 【Brand New Structure】By utilizing an optimized direct extruder and a movement structure in the extrusion system and cooling system, it can effectively and precisely deliver the filament, quickly melt and cool to form, and run smoothly to reduce layer lines. 【Smooth and Detailed】One-click vibration compensation, by detecting the resonance frequency of the X/Y axis, smart adjustments are made to motion control, effectively eliminating resonance vertical lines and bracket lines, ensuring printing accuracy and stability. 【LeviQ 2.0 Auto Leveling Smart Z-Offset】By designing a unique module, it can intelligently compensate for Z-axis offset, while also supporting custom Z-axis compensation values, meeting the needs of different users and usage environments. Tech Specs Machine Weight 8.4kg Machine Dimensions 19.1x17.1x18.2in./ 486x435x463mm(HWD)  Printing Volume 3.2gal./12.1L Printing Dimensions  9.8x8.7x8.7in./ 250x220x220mm(HWD) Nozzle ≤500℉/260°C  ø 0.4mm (replaceable) Hotbed Temperature ≤230℉/110°C Printing Speed 500mm/s(Max.)   300mm/s(Typ.)  Z-axis Double Threaded Rod X/Y axis Double Metal Spindle X/Y axis Belt Tensioner Included Filament Detection  Default Machine Leveling  New Anycubic LeviQ 2.0 Automatic Leveling System (25-point) Printing Platform PEl Magnetic Spring Steel 8.7x8.7in./220x220mm Extruder Direct Extruder + Double Gears Cooling Fan RPM  7000rpm/min Control Panel  4.3" LCD Touch-Control Screen Motherboard 32-bit Silent Motherboard Power Supply 400W Printing Material PLA/ABS/PETG/TPU Data Input  USB Port x 3

---

 - ANYCUBIC Kobra 2 Max -

Tech Specs Machine Weight 21kg Machine Dimensions 29.1x28.9x25.1in./ 740*735*640mm(HWD)  Printing Volume 23.2gal./88.2L Printing Dimensions  19.7x16.5x16.5in./ 500x420x420mm(HWD) Nozzle ≤500F/260°C  ø 0.4mm (replaceable) Hotbed Temperature ≤194F/90°C Printing Speed 500mm/s(Max.)   300mm/s(Typ.)  Z-axis Double Motor Double Z-axis X/Y-axis Double Metal Spindle X/Y-axis Belt Tensioner Included Filament Detection  Default Machine Leveling  New Anycubic LeviQ 2.0 Automatic Leveling System (49-point) Printing Platform  PEl Magnetic Spring Steel 16.5x16.5in./420x420mm Extruder  Anycubic Self-Developed Direct Extruder + Double Gears Cooling Fan RPM  7000rpm/min Control Panel  4.3" LCD Touch-Control Screen Printing Material PLA/ABS/PETG/TPU Data Input  USB ports x 3  In The Box