Switching mode before controlling RGB,RGBW,RGB+CCT strip light

Press ON&OFF key to turn off LED strip light:

1)Long press "Mode" and "W" button at the same time,after controller sounds 3 times after 5 seconds,it's changed to be RGB

mode,then you can use it to control RGB LED strip light.

2)Long press "W" and "60S" button at the same time,after controller sounds 4 times after 5 seconds,it's changed to be RGBW

mode,then you can use it to control RGBW LED strip light.

3)Long press "Mode" and "60S" button at the same time,after controller sounds 5 times after 5 seconds,it's changed to be RGB+CCT

mode,then you can use it to control RGB+CCT LED strip light.

***Updated version,Long press ON key to turn off keypad tone***1)Working with RGB,RGBW and RGB+CCT DC 12-24V 5050 or 3528 led strips directly.But WL-Box1 gateway hub is needed for voice control,FUTD01 is needed for DMX512 control.

2)1%-100% Dimming:You can get adjust the strip lights brightness as you need

3)Night light guidance function:Red LED indicating lamp in the ON/OFF button,make sure you can find where the controller is in dark

4)Capacitive and stable touch screen:Very sensitive touching feeling,it also would make your house beautiful

5)Touching button with sound:You can hear prompt tone when you touch the controller so that you know the touching works or not

1)This P3 wall panel works with LED strip light directly.Do not need any other remote or controller. Optional can be used with compatible remotes (sold separately)

2)It will work with RGB,RGBW,RGB+CCT LED strip light,please don't use it with other color LED strip light.

3)60S Delay OFF function:After pressing this button,LED strip light would turn off after 60 seconds,so that you wouldn't get hurt in dark.

4)DC 12V-24V working voltage,please don't connect it with AC!!!