Description

LightMate 2 Film Camera Light Meter High Precision Chargeable Ambient Light Digital Exposure Meter

Description:
- It is a light meter or exposure meter used to provide exposure parameters for film cameras.
- Your camera needs to be able to manually control the aperture and shutter speed.
- Based on your shooting creativity, use the aperture and shutter value provided by the exposure meter to create.
- Firmware website: Lightmate.pro

LightMate Lite 2 is the new generation product of the Lite series exposure meter. On the basis of the previous generation, Lite 2 has removed the "Focus Assistant" function and added the following new features while retaining high performance and reliability:
1. A new appearance with clearer edges and corners. (Simplicity without unnecessary lines!)
2. Global debut! The metering button can be replaced. (Your exquisite fast buttons don't need to be dusty anymore!)
3. Cold shoe with adjustable thickness. (What should I do if the cold shoe is too loose after replacing the camera? - Fixing with the screwdriver!)
4. The position of the cold shoe can be adjusted. (The cold shoe is set in the right? In the middle? It's up to you the final say!)
5. The appearance of the newly designed light metering lens. (Combined with glass lenses, more light intake makes metering more accurate!)
6. Larger capacity built-in batteries. (Compared to the previous generation, it has increased by 10mAh.)

Basic Function:
- Press type dial wheel. (Press the dial to switch between shutter priority and aperture priority, long press to enter ISO/system settings)
- Two stage metering button. (Half press metering, long press continuous metering; full press on/off)
- Single metering, automatic continuous metering, average metering. (Quickly switch multiple metering modes)
- Aperture priority and fast priority modes.
- Exposure compensation function. (Support step value +/-0.5EV, range +2EV ~ -2EV)
- Light metering over range prompt. (Lower limit prompt Error Underexposure and upper limit prompt Error Overexposure)
- Exposure combination reciprocity. (Quickly obtain multiple exposure combinations with the same exposure amount)
- LED light prompts completion of metering. (Flashing prompt after metering is completed, can be closed in the menu)
- Save settings and exposure parameters. (Remains unchanged after shutdown/restart)
- Real time display of remaining power.
- Customize the automatic shutdown time. (Default no operation for 30 seconds of dark screen ->automatic shutdown for another 2 minutes (can be adjusted in the menu)
- Customize screen brightness adjustment.
- Screen flipping display. (Adapted to cameras with cold shoe at the bottom. Eg. for Rollei 35 camera)

Advanced Functions:
- "Digital depth of field ruler". (Quick provision of depth of field information, switchable lens system (full, medium, large, half grid) and lens focal length)
- "Digital ND filter" function. (Compensate for metering results after installing a light attenuation filter in the imaging lens)
- Provide multiple dial interfaces one after another. (such as "classic numbers", "pointer simulation", etc.; this function will be added later through firmware updates)
- Update the system firmware through USB-C. (Supports PC or MAC, recognized as a USB flash drive, firmware can be inserted!)

Specification:
- Product model: 0x9635
- Light receiving method: reflected light
- Light receiving angle: approximately 35 degrees/equivalent 63mm lens
- Sensing element: silicon photodiode array
- Metering mode: aperture priority metering/shutter priority metering/EV metering
- Light metering range (ISO100): EV0 ~ EV20
- Photometric accuracy: +0.1EV
- Display range:
  Sensitivity: ISO1 ~ ISO8000 (1/3 step)
  Shutter: 60s ~ 1/8000s
  Aperture: F1 ~ F64 (1/3 step)
  EV: EV1 ~ EV22
- Screen size: 0.96-inch OLED display/128x64 pixels
- Battery type: built-in polymer lithium-ion battery 3.7V/110mAh
- Charging parameters: Charging interface USB Type-C/voltage DC5V+10% maximum current 0.2A, charging time about 1 hour
- Working temperature: -10°C ~ 60°C
- Working humidity: 30% ~ 80%
- Storage temperature: -20°C ~ 70°C
- External dimensions:
  Excluding hot shoe: 38mm x 29 5mm x 145mm
  Including hot shoe: 38mm x 295mm x 18.5mm
- Net weight: 35g (metal)

Package Included:
- 1 x Film Camera Light Meter
- 1 x Screw driver
- 1 x User Manual
- 1 x Red Shutter Button

Note:
- The film camera is not included.