Weatherproof | 2500W | 9,000L/H Flow Rate ² When low water pressure gets you down, power it up with the 5-stage Water Pump. It’s the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You’ll find our 5-stage water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required. ² The 5-stage Water Pump features an IP rated commercial motor, full stainless steel pump body, cast iron ends, one-inch inlet and outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in run-dry thermal protection. ² Pumping out at a rate of 9000L/hr with a 64m head, the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any 240V socket ² Whether you’re using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one. Features ü Powerful 2500W self-priming multi-stage pump ü Garden irrigation, farm irrigation & home water supply ü 100% duty cycle - Designed for continuous operation ü Rust resistant stainless steel pump body w/ cast iron ends ü Fully automatic operation on/off controller ü Huge 64m head - Perfect for applications over two stories ü Anti-corrosive alloy motor housing, ceramic and carbon seals ü Built-in thermal protection ü Efficient cooling system ü Highly conductive copper motor – Efficient & low heat generation ü Corrossion resistant brass connector ü Leak proof rubber ring ü Easy connecting plug and cable ü Fully automatic pressure controller ü Australian standard cable and plug 1 year warranty – We are always ready to back you up Specifications l Pump Maximum Power: 2500W / 3.5HP Maximum Flow: 150L/min, 9,000L/hr Maximum Head: 64m Stage: 5 stages Plug & Cord: SAA 250V/10A *0.6m Brass connector: 1" Inlet/outlet: 1" Casing: stainless steel Motor: Copper wire Protection class: IP44 Mechanical Seal: Ceramic/ Carbon l Controller Voltage: 220/240V Frequency: 50/60Hz Maximum current: 10A Maximum water temperature: 60 degrees Maximum working bar pressure: 10 bar Protection grade: IP65 Inlet and outlet size: 1" (25mm) Dimensions: 22 x 12.4 x 17cm Colour: Yellow Package Content 1 x 5 Stage Water Pump 1 x Pump Controller
|