Details:
Use imported original audio highpower transistor
Use MKP metallized polypropylene capacitor for audio.
Use low noise audio signal tubes BC546B, BC556B, and audio special drive tube KTB1369 KTD2061 as the pre-drive.
Four 2SD718 original power tubes per channel are used as current output tubes.
8 ohm load can output 100W power (+- 42V DC voltage)
Specifications:
Working voltage: DC+/- 15V to DC+- 50V
Output power: 100W 8R (DC+/- 42V)
Voltage GAIN: 34 times
Input sensitivity: 1.2V 100W RMS 8 Ω
Signal-to-noise ratio:>98DB
Distortion:<0.02 THD 1K HZ 10W
Quiescent current IQ of output stage: about 30MA/1 channel
PCB size: 96 * 51MM
Note:
Diy Kit:all parts need buyer to solder it !
Assembled Board:have tested it well !