Product information "H0 Luminous giraffe fire brigade on a trailer with 6 LEDs white"
Floodlight spots on vertically adjustable telescopic support. E. g. for fire brigade or civilian tech task force. With base socket for easy mounting. Maintenance free by LED lighting. Height: in approx. 6,9 cm, up approx. 8,8 cm.
Floodlight spots on vertically adjustable telescopic support. E. g. for fire brigade or civilian tech task force. With base socket for easy mounting. Maintenance free by LED lighting. Height: in approx. 6,9 cm, up approx. 8,8 cm.
Fully assembled ready to use, has current limiting diode/resistor, simply plant on your layout and add power. (recommended power module is 10-16V AC Viessmann 5215 not included)
From Instruction sheet: Caution:
Resistor and diode at the cables are needed for proper function of the LED model. Never cut them off! Never cover resistor or diode with insulation material, because they have to be cooled by surrounding air!
While connecting the cables, leave a loop of about 2 – 3 cm length below the LED model, so that you can pull and reverse the LED model from the mounting hole during any work. Connect the LED model to the lighting power output of a model train transformer (e. g. item 5200) or power supply as shown in fig. 4 and/or 5.
Resistor and diode at the cables are needed for proper function of the LED model. Never cut them off! Never cover resistor or diode with insulation material, because they have to be cooled by surrounding air!
While connecting the cables, leave a loop of about 2 – 3 cm length below the LED model, so that you can pull and reverse the LED model from the mounting hole during any work. Connect the LED model to the lighting power output of a model train transformer (e. g. item 5200) or power supply as shown in fig. 4 and/or 5.
DC voltage: Connect the diode (red part with black mark) with the plus pole of the power supply, the resistor with the minus pole.
AC voltage: Operation with AC voltage could cause some flickering. We recommend to use the Viessmann power module, item 5215, which is sufficient for ca. 100 LED lamps or reflectors (fig. 5). Connect the cable to the diode with the brown output socket, the resistor with the red output socket of the power module.
AC voltage: Operation with AC voltage could cause some flickering. We recommend to use the Viessmann power module, item 5215, which is sufficient for ca. 100 LED lamps or reflectors (fig. 5). Connect the cable to the diode with the brown output socket, the resistor with the red output socket of the power module.