Description:

This riflescopes  can be applied to various rifles. It has a crosshair instead of traditional front sight and gap, and this can obviously increase aiming speed,accuracy and percent age of hits. If you want to save it better：

• Keep scope in the place free from acide, alkodine and other corrosives. 

• Dust and dirt on the surface of scope should be cleaned with soft cloth or soft tissue with a little alcohol.

Focusing ：Look throngh scope within 3 or 4 inch distance from your eye to eyepice lens. If you can't see the reticle clearly, loosen kurled lock ring and rotate eye bell until the reticle appears clearest. Then screw the lock ring to lock the eye bell frmly.

Mounting ：Scope is intalled on gun by means of mount.Rotate scope tube so that vertical crosshair is vertical and horizontal crosshair is horizontal. Adjust the positon of scope on the rifle so ihat proner eye relief is achieved. Then tighten all screws to fix scope on the rfle firmly.

Boresighting ：Aim at a target 100 m away and fire at it. If the impact point deviates from the aiming point, measure the verical and horizontal distance between these two points. Screw off upper and right handwheel covers of the scope and turn two handweels in the direction showed in the table below. Keep on firing and adjusting untill the impact point coincide with the aiming point.

Specification:

Magnification  :  4x

Weight  :  232g

Length : 190mm

Objective Diameter :  32mm

Exit pupil distance  :  94mm

Tube Diameter  :  25.4mm

Field of View  :  33.7@ 100yds

Reticle Type  ；Range Finder Graph

Coating  ： Blue Coating

Shock Proof  :  Yes

Focus Ring Adjustable  :  Yes

Nitrogen Filled/Water Proof and Fog Proof  :  Yes

Includes:

1 x 4X32(L=190mm) optics rifle scope

2 x Free rail mounts