Product Description
【HEAT UP QUICKLY & ENERGY SAVING】The 220V 60W soldering iron features an advanced ceramic printed heater to heat up to the targeted temperature quickly, and adjustable temperature range 200~450℃ with large venting holes make it much more energy-efficient.
【UPGRATED ONE-HANDED USE DESOLDERING PUMP】The Solder sucker with simple construction, you can cock it and press the trigger button with one hand. High pressure vacuum can remove solder from a printed circuit board effectively. The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion.
【APPLICATION & WARRANTY】With this multifunctional tool kit, you can repairing various electronics and circuit board, like welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories, trinkets of children, crafts and more. 

Specification
Soldering Iron
EU plug 
Voltage：220V/AC
Power :60W
Temp Range:200°C to 450°C
Temp Adjustable:✔
Color:Blue

Soldering Irons Tips
Standard and easy-to-change.
Free to choose which you need on the welder project.
Strong welding ability
High-quality chrome plating
5 different specifications, easy to use in various working environments

Solder Wire
Weight: About 18g.
Easy to use and carry.
Suitable for repair, rework, and electronics solder.
Our tin wire has good electrical and thermal conductivity, lower melting point, smoother soldering, brighter solder joints, and easier handling
Tips：The temperature needs to reach 300°C to dissolve quickly

Solder Sucker
Lightweight.
High voltage vacuum with strong suction.
Used for sucking melted solder when welder.
We adopt a semi-aluminum design, which is lighter than the previous all-aluminum design, but does not affect our suction power at all.
40% more suction than before, thanks to our stronger springs

Soldering iron stand
The soldering iron stand can effectively protect the iron from being ironed at high temperature or the iron tips dropping on the ground.

Follow The Steps Below To Make Your Welds
1.First of all, make sure that you have all the necessary elements available to carry out your weld.
2.Choose the right tip type.
3.Plug in the iron, set the appropriate temperature, and wait about 30 seconds for the tip to heat.
4.Then check that the parts are clean and not rusted, and clean them if necessary.
5.Then put the parts in contact and apply the hot tip to the contact point.
6.Be careful not to touch the tip or hot parts with bare hands (wear gloves if necessary).

Caution
When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a smoke while and a smoke never comes out again.
Use soldering stand and other aids to avoid bur fingers.
Don't pulled the soldering and other aids to avoid burnt fingers.
After finish the longer life tip face
Don't file the long life tip face and Don't apply too much solder unnecessarily.

Warm Tips
1.Please be really careful when you are using the iron, and keep it somewhere kids can’t reach.
2.Please switch to the 200℃ model when not using the soldering iron. Please do not keep the soldering iron working under high temperature.
3.When welding, do not use too much pressure.
4.To avoid oxidation, please clean soldering iron tip. If there is black oxide on the iron tip, please clean it by wet sponge firstly.
5.Long-time and high-temperature work may shorten its life.
6.Do not leave the soldering iron idle for a long time at the working temperature, it may burn the soldering iron or even other things.

Package Included
1x Temperature Adjust Soldering Iron
1x Tube of Premium Solder 
5x Replaceable Different Soldering Tips
1x Desoldering Pump
1x Curved Tweezers
1x Straight Tweezers
1x Soldering Iron Holder/Sponge