Why choose our Digital HID Conversion kits?
* 100% Plug and Play design.Ballasts had the EMC built in it,and the mini size ballasts are save the space get more easier to install and more stable.
* Our product comes with a 3 year warranty and easy installation. We stand behind our hid kits with support and service like other company.
* We offer a wide range of options including 6 bulb sizes, 7 different colors and 2 types of ballasts. Not only do we sell the conversion kits, but all the accessories needed for proper installation on most vehicles.
Specifications | |
Voltage Input | 9-16V |
Voltage Norm. | 13.2V |
Current Norm. | 3.6A |
Current in Max | 6A |
Power Output | 55W |
Working Temperature | -40 ~ +105 Centidrgee. |
HID Efficiency | 98.68%, 3, 200 LM. |
Life-Span | 3, 000 hours |
| E4 & ISO-9001:2000 Approved |
* 6 hours continuous working aging test.
* Connection circuit protection test.
* Short circuit protection test.
* Lack of voltage protection test.
* Over voltage protection test.
* Flash light concussion test.
* Quakeproof capability test.
* Cold, warm boot test.
* Polarity protection test.
* EMC anti-jamming test
What is HI/LO Bi-Xenon?
* This will depend on the type of vehicle you drive. For most vehicle, the headlights have 2 bulbs each: one for low beams and one for high beams. In this case, you will need one regular HID kit for the low beams. If you also want your high-beams to be HID lights, you will need a second regular HID kit.
* On some other vehicles, the headlights have one bulb each. This bulb performs the function of both the high beam and low beam. In this case, if you want to keep the high beam and low beam functions, you will need to install a special HI/LO kit. The HI/LO HID kits have special bulbs that perform both high and low beam functions.
* A Bi-Xenon bulb replaces a H4 halogen bulb that produces low beam as well as high beam. A H4 halogen bulb has therefore two filaments, one for low beam and one for high beam. The Bi-Xenon bulb however, only has one 'light cell'. (See The Pic. Below)
By means of an ingenious electro-magnetic construction, this light cell can change position. One position is low beam, the other is high beam.
HID Color Temperature:
* The color of light is measured and expressed in degrees Kelvin (K). The color spectrum ranges from a red to purple. HID headlamps do not have this wide of a range though there are different bulbs that skew toward either extreme. Most are more focused on the center of that range.
* 4,300K is the temperature that is closest to natural daylight. Factory HID headlamps are setup for this color temperature.
Our Benefits of
Slim Ballast:
Slim Ballasts usesmaller internal components and still offer the same input and output power as its standard sized version. With the Igniter unit in an epoxy filled chamber, we are able to reduce the size of the core unit by roughly half, also reducing the weight significantly. Slim Ballasts are easier to mount, weigh less, and allow users to install their HID systems faster with less time spent under the hood, and more time enjoying their HID lights!
Installation Guide:
Step 1: Open hood and locate the factory light bulb you are trying to convert. If fog lights, you may need to pull out your factory fog light housing to access the back. On some vehicles you can access factory bulbs from the engine bay or from the wheel wells with your wheels fully turned on direction. Please consult your owners manual or dealer on how to access your factory light bulbs. In 90% your bulbs are easily removed without too much trouble. Once your factory light bulb is removed, you can prepare for the HID bulb insertion.
Step 2: Remove the plastic capsule preinstalled on the HID bulb and insert into your headlight socket. HID bulbs should fit similar to your factory light bulb, but the tolerances may be slightly different on certain vehicle models. Bulb installation will vary from twisting to clamping from the back depending on the bulb type. Be very gentle with the HID glass portion. Do not touch the glass with your fingers. If it does end up getting dirty, simply wipe with clean cloth gently.
Notice: Some
vehicle models may require adapters for the bulb to
fit into the socket. These include H7 bulbs. Some
parts off of your original headlight may be be
required depending on car model. Example, 9007 light
bulbs will require the reinstallation of the plastic
bulb holder adapter. Some BMW / VW / Mercedes / Saab
will require a metal adapter or plastic adapter to
hold the bulb in place.
Step 3a: Once the HID bulb is fixed into place locate the factory connector where the original halogen bulb was connected to. You will now connect the supplied wire (may be a plug or 2 metal tips) that you must insert into your factory connector as shown below. When we say factory connector, this is the connector your original bulb was feed power with.
If you purchased a Bi-xenon kit, or a kit with
relay, your installation will be a little different
than above. See steps 3b or 3c.
Step 3b: If your kit included a relay you will not use the provided extra wires shown in Step 3a. that connect ballast to factory headlight plug. Instead the ballast get connected to the relay as shown below. The relay then will connect to your factory headlight plug. Some relays will have two plugs one for each side, while others only one headlight plug. Remember a relay simply gets a signal from your headlight plug, then allows power to flow directly from your battery.
Step 3c: If your kit purchased is a bi-xenon kit also known as hi/low (low beam + high beam HID with movement). This only applies to kits with bulb types 9004 9007 H4 H13 9008. Notice on these kits there will be only 1 headlight plug connector. One of your headlight connectors may not be used.
Step 4: Before mounting ballast permanently please test the system. Low beam, high beam and fog light function if it applies to your install. It is best to turn the vehicle on to test the system as some vehicles do not give full voltage when vehicle is running only from battery.
Step 5: Mount the ballasts on any existing
bolt or flat surface away from excessive heat. We do
not recommend mounting on top of the radiator or in
front or behind it. Ballasts are electronic devices
which excessive heat can ruin. Make certain the
wires with your kit cannot get tangled into the belt
line or are resting on very hot components of the
engine.