Key Features: 
1.100% Brand New OEM 
2. PERFORMANCE Spark Plug Wires Set CHEVY/GMC 1999-2006 LS1 VORTEC 4.8L 5.3L 6.0L 
3. 8mm Spiral Wound Design 
4. UltraLow Resistance KEVLAR Core 
5. RFI Suppression 
6. Ultra High Strength/High Temp. Silicone Boots and Sleeve 
7. Ready for Install Straight out of the box 

Reference Number: 
483227831, M8-48322 

Compatible Models and Years: 
- for 2004 Buick Rainer 5.3L 
- for  2002-2004 Cadillac Escalade 6.0L 
- for  1999-2006 Chevy C,K 1500 Silverado Gen III LS1 Vortec Trailbazer - 4.8L 
- for  1999-2006 Chevy C,K 1500 Silverado 4.8L 
- for  1999-2006 Chevy SSR 4.8L 
- for  1999-2006 Chevy C,K 1500-2500 Silverado, Ssr Gen III LS1 Vortec 5.3L 
- for  1999-2006 Chevy Suburban, Tahoe Gen III LS1 Vortec 5.3L 
- for  1999-2006 Chevy C, K 2500 Silverado Gen III LS1 Vortec 6.0L 
- for  1999-2006 Chevy Suburban, Tahoe Gen III LS1 Vortec 6.0L 
- for  1999-2006 GMC C, K 1500 Sierra Gen III LS1 Vortec, Envoy 4.8L 
- for  1999-2006 GMC C, K 1500 Sierra Gen III LS1 Vortec 5.3L 
- for  1999-2006 GMC Yukon, Denali Gen III LS1 Vortec 5.3L 
- for  1999-2006 GMC C, K 2500 Sierra, Yukon Gen III LS1 Vortec 6.0L 

Installation: 
（Take "2005 PT Cruiser 2.4L" as an example） 
Step 1 :Remove the six 8mm upper manifold retaining bolts. 
Step 2 :Loosen the air intake clamp at the throttle body. 
Step 3 :Lift the upper intake manifold and retain out of the way using a bungee cord. 
Step 4 :Remove old plug wire. 
Step 5 :Using cotton swab, apply a very small amount of dielectric grease to the boot interior at each end (just the boot - not the terminal). 
Step 6 :Reinstall new plug wire. 
Step 7 :Repeat for each cylinder until done. 
Step 8 :Lower intake manifold back in place and tighten to spec from interior bolts to the outside (no new gaskets required). 
Step 9 :Tighten clamp at air intake to throttle body. 

Parcel Content: 
- 1 x Electronic Ignition HEI Spark Plug Wire Set (8 Wire Set)