CNC Router Kit 3 Axis ENGMATE Motor Driver 13oz-in Nema11 Stepper Motor 24V PSU
/12
Descriptions
ENGMATE™ 3 Axis Kit for CNC DIY
1*5 Axis Breakout Board + 3*EMA2-040D15 Microstep Motor Drivers + 3*EMA112-4506S4 Nema11 13oz-in Stepper Motors + 1*24V 10A Switching Power Supply
The upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase stepper driver controller. The breakout board using high-performance three-state bus driver 74HC244 and Schmitt inverter 74HC14. The input signal is amplified, rectified, filtered to make the drive capability of the output signal more stable and stronger. With this 5 axis breakout board, any 1-5 Microstepper driver controllers can be directly controlled by the PC via the MACH3, KCAM4, etc. parallel-control CNC software.
Please note: This board uses parallel port to communicate with computer, the USB is used for providing power for the board.
The stepper driver board controller in kit is a high performance microstepping driver adopting of bipolar constant-current chopper technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market.
In short, you will get more benefits from the Kit on CNC work, especially extra-low motor noise offers excellent quietness. Please purchase this kit with confidence.
Why Purchase CNC Products in our store?
 |  |  |
10+ Years Rich Experience | High Quality Product | Professional After-Sale Service |
We have been fulfilling CNC Motion Control needs for over 10 years to support any project you may have. | Stepper motors and drivers from ENGMATE™ are with high quality for stable and durable usage. | The professional technical support and excellent after-sales service are backed up by a loyal and experienced team. |
5 Axis Breakout Board
- • High performance, cost-effective
- • Maximum support 5-axis stepper motor driver controllers
- • Compatible with MACH3 etc. parallel-control CNC software
- • USB power supply and peripherals powered phase are separated to protect computer security
- • All the signals are opto-isolated which can protect your computer security
- • 5-input interface to define the Limit, Emergence-Stop, Cutter alignment etc
- • Wide input voltage range: 12-24V, and with anti-reverse function
- • One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc
- • Compatible with all the 2 phase microstep drivers in the market
- • Output 0-10V analog voltage for inverter to control the spindle speed
- • Shape Pulse and direction signals. Data transfer speeds of up to 10MBit/S
- • Amplification, filtering, enhancement processing drivers enable signal
Hybrid Microstepping Driver (EMA2-040D15)
- • Supply voltage from 18-40V DC
- • Output current programmable, with 7 stalls output current setting, from 0.21-1.5A (Peak)
- • Adoption of bipolar constant-current chopper technology
- • Low-noise, low-vibration and low temperature rising.
- • Microstep resolutions programmable, with 7 stalls microstep subdivision setting
- • Automatic Half Current, motor wires miconnected protection
- • Internal optical isolation, pulse input frequency up to 100KHz
- • Support PUL/DIR mode
- • Suitable for 2-phase and 4-phase Hybrid stepper motors
Hybrid Stepper Motor (EMA112-4506S4)
- • High torque, more smooth movement
- • High efficiency, energy-saving, low noise and low vibration
- • High start torque, low start current and reliable performance
- • Simple 4 wires ensure easier wiring, installation and maintenance
24V 10A Switching Power Supply
- • High efficiency, high reliability, low cost
- • Adjustable ±10% Output Voltage support
- • PWM control and regulation, insure the steady and precise output voltage
- • Over-temperature protection: built-in a powerful fan for cooling. RTH3≥45°C, fan on. RTH3≥85°C, output shutdown
- • Built-in EMI filter
- • 100% full load burn-in test
- • Over current, over voltage, short circuit
- • Low output ripple and yawp
Common-anode Connection
Applications
Suitable for a variety of small sized automation equipment and instruments.
- • For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc...
- • For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc...
Matching Stepper Motors
| Model NO. | Min Motor Size | Max Motor Size | Recommended Supply Voltage | Recommended ENGMATE Stepper Motors |
| EMA2-040D15 | NEMA 8 | NEMA 17 | 24V DC | EMA112-4506S4, EMA162-3805S4 |
| EMA2-040D22 | NEMA 8 | NEMA 17 | 24V DC | EMA082-4208S4, EMA142-4520S4 |
| EMA2-050D42 | NEMA 17 | NEMA 23 | 24V/36V DC | EMA172-6015S4, EMA232-5615S4 |
| EMA2-050D56 | NEMA 23 | NEMA 34 | 36V DC | EMA232-7630S4, EMA232-11235S4 |
| EMA2-070D56 | NEMA 23 | NEMA 34 | 48V DC | EMA242-8840S4, EMA342-7842S4 |
| EMA2-080D72 | NEMA 23 | NEMA 34 | 60V DC | EMA342-10050S4, EMA342-15662S4 |
| EMA2-080A72 | NEMA 34 | NEMA 42 | 80V DC | EMA422-15065S4 |
| EMA2-220A80 | NEMA 34 | NEMA 52 | 110V/220V AC | EMA422-20180S4 |
 | ||||
Specifications
| Electrical Properties of 5Axis Breakout Board(ambient temperature Tj = 25°C) | ||
| Input Voltage | Get power from PC via USB port and 12-24V power supply for limit/Estop switch |  |
| Drive Type | Pulse and Direction Signal Control(EMA2-040D15/EMA2-040D22) | |
| Suitable Microstep Driver | 2 Phase Microstep Driver | |
| Net Weight | Approx 75g | |
| Dimension | 90*70*20mm (L*W*H) | |
| EMA2-040D15 Stepper Driver | ||
| Model NO. | EMA2-040D15 |  |
| Input Voltage | 18-40V DC | |
| Output Current | 0.21-1.5A (Peak) | |
| Pulse Input Frequency | 100KHz | |
| Cooling Method | Natural Cooling or Fan Forced cooling | |
| Environment | Avoid dust, oil fog, corrosive gas | |
| Ambient Temperature | 0°C~50°C (32°F~122°F) | |
| Operating Temperature | 70°C (158°F) Max | |
| Storage Temperature | -20°C~65°C (-4°F~149°F) | |
| Humidity | 40%RH-90%RH | |
| Dimension (WxHxD) | 86×55×20mm | |
| Weight | 130g | |
| Suitable Motor | Nema 8, Nema 11, Nema 14, Nema 16, Nema 17 | |
| EMA112-4506S4 Nema11 Stepper Motor | ||
| Model NO. | EMA112-4506S4 |  |
| Motor Type | 2-Phase | |
| Step Angle (°) | 1.8 | |
| Rated Voltage (V) | 4.56 | |
| Rated Current (A) | 0.67 | |
| Phase Resistance (Ω) | 10.4 | |
| Phase Inductance (mH) | 4.9 | |
| Holding Torque (g.cm/oz-in) | 950/13 | |
| Rotor Inertia (g.cm²) | 12 | |
| Motor Length (mm/in.) | 45/1.77 | |
| Frame Size (mm/in.) | 28/1.1 | |
| Lead No. | 4 | |
| Shaft | Single | |
| Motor Weight (g) | 140 | |
| 250W 24V 10A Switching Power Supply 110/220V Switchable Temperature Control | ||
| Input Voltage Range | 110VAC/ 220VAC±20% (selected by switch) |  |
| Input Frequency | 47~63Hz | |
| Output Voltage | 24V | |
| Rated Output Current | 10A | |
| Output Voltage Adjustment Range | ±10% | |
| Weight | 820g | |
Content
| Estimated Delivery Time | ||
| Australia (NSW) | Australia Post | 2-3 business days |
| Australia (VIC,SA,QLD,NT) | Australia Post | 4-6 business days |
| Australia (WA,TAS) | Australia Post | 6-8 business days |
| New Zealand | Australia Post | 6-9 business days |
|
Other Countries (May depart from other stock location) |
International Airmail Service | 12-21business days |
Please DO CONTACT AND CONFIRM with us BEFORE you bid, IF you:
- • Need the item urgently.
- • Require that the item should be delivered within a certain time.
- • Have any other questions/requirements about delivery.
Remarques
- • Usually, your order will be dispatched before the next working day after the full payment is cleared when stock lasts.
- • Notification will be sent after your order is dispatched, please check you email or ebay order records for date of dispatch.
- • It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.
- • Please contact us if you have any trouble in receiving your orders. We will help you to track them.
Safe and Easy Payment
PayPal
- • We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with NO surcharge)
-
• If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.
Remarks
- • Payment is required within 5 days after auction ends.
- • All sales are final. Shipping and handling charges are not negotiable.
- • Your PayPal shipping address will be used for delivery BY DEFAULT unless otherwise informed.
- • Please double-check to make sure your PayPal shipping address is correct before making payment.
Satisfaction Guaranteed
30 Days Money Back Guarantee
- If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message) within 30 days of receipt of goods for return & refund guidance.
Free Replacement
- If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
- We provide ONE YEAR warranty on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
- • All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
- • Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.