The T1 LED has added Blue and Black/White wires for the use of a KeepAlive device. This decoder has internal resistors for LEDs eliminating the use of external resistors for F0F or F0R. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. Use the standard T1 decoder if your locomotive uses incandescent bulbs.

Note: The Green and Purple wires on this decoder are not used. The T1-LED is a 2-function decoder, but still uses the 9-pin JST which includes the Green and Purple wires.

 

Back EMF Load Compensation: Provides superior slow speed control and high performance under load.
 

Quiet Drive: Super-quiet motor control for "buzz" free motor performance.
 

DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
 

RailCom®: This feature allows the decoder to talk to the command station. RailCom supports expansion for new features.
 

Variable Momentum: Allows you to make custom acceleration and deceleration curves.
 

LED Support: This product does not require external resistors when connecting LED's.
 

Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.
 

Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects!
 

Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.
 

Decoder Lock: Feature which prevents accidental/unwanted programming while activated.
 

Airwire™ Compatible: Fully compatible with Airwire™ operation.
 

User-Loadable Speed Tables: Configure custom speed curves and set speed limits.

SPECS:

Interface Type: Hard-Wire / Direct-Plug (9-Pin JST)
 

Dimensions (L x W x H): 0.969" x 0.661" x 0.193" or 24.61mm x 16.79mm x 4.9mm
 

Scale: HO Scale
 

Continuous/Peak: 1.3/2.0 Amp
 

Total Functions: 2
 

Function Rating: 100 mA
 

LED Outputs: 2