DENON DH-610S Separate type Reel-to-reel 38/2 track tape deck Open reel deck

[Motor used] For capstan: 6-pole outer rotor type AC servo motor / For reel: 6-pole AC servo motor x2

[Drive method] Capstan part: Direct drive by AC servo motor / Reel part: Back tension servo by AC servo motor

[Track format] 2 tracks, 2 channels, stereo system

[Head] Recording head and playback head: Hard permalloy head / Erasing head: Ferrite head

[Tape speed] 19cm/s, 38cm/s

[Speed deviation] Within ±0.5%

[Fast winding time] Approximately 2 minutes 30 seconds (No. 10 reel, 740m tape)

[Reel diameter used] Maximum size 10 (26 type)

[Recording bias] Approximately 180kHz (bias amount can be adjusted by ±40%)

[Recording and playback compensation characteristics] NAB standard (recording compensation can be adjusted depending on the tape used)

[Total SN ratio] 66dB or more (for maximum recording level 514pwb/mm) / 58dB or more (for standard recording level 200pwb/mm)

[Total 3rd harmonic distortion rate] 0.08% or less (1kHz reference level, when using 3M#250)

[Overall frequency characteristics] 38cm/s: 20Hz to 30kHz within ±2dB/19cm/s: 20Hz to 20kHz within ±2dB

[Channel separation O] 50dB or more (1kHz)

[Wow/Flutter] 38cm/s: 0.025%wrms or less/19cm/s: 0.03%wrms or less

[Input] Mic: 50kΩ unbalanced, -72dB(ATT.off), -60dB(ATT.on)/Line: 100kΩ unbalanced, -22dB (at VR.max)

*However, 0dB:0.775Vrms

[Output] Line: Output impedance unbalance: 100Ω or less, Compatible load impedance: 600Ω or more, Standard output level: 0dBm, /Headphone: Compatible load impedance: 8Ω

[Power supply] AC100V, 50Hz/60Hz

[Power consumption] 120W

[External dimensions] Mechanism part: Width 470x Height 385x Depth 270mm/Amplifier part: Width 460x Height 180x Depth 235mm

[Weight] Mechanism: 20kg/Amplifier: 6.5kg