JYX04 Micro-USB 3-Lead Acc Hardwire Kit Port for Only M300S Dash Cam

【24-Hours Parking Mode】For M63H dash cam has 24-Hours Parking Mode. It requires continuous power, and Connect with JYX03 Hard Wire Kit to use, This parking mode allows you to record the whole night while you are away.

    【Compatible 12-24V Vehicles】Hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12-24V.Input:12V-24V, Output:5V/3A, Micro-USB port.
    【24/7 Parking Surveillance】24 Hours Surveillance - Directly to the battery for constant 24hrs/7days power when the car is turned off. When using this function please turn on “Parking Mode” in dashcam.

    【LOW VOLTAGE PROTECTING】Multiple Security Protection - With low voltage protection, hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V（+-0.2). Not applicable to trucks with voltage above 24V. More security protection like over-current, short-circuit, reverse connection, and overheat.

    【Power Supply Protective】The Micro-USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against excessive current, overheating

Four Options of Low Voltage Protection:

For 12V Battery: 11.8V 12.0V 12.2V 12.4V

For 24V Battery: 23.6V 24.0V 24.4V 24.8V

Note: If you press at the same time to select 2 or more options, or do not select the voltage option, this default voltage cut-off is 11.8VDC for a 12VDC battery and 23.6VDC for a 24VDC battery. 12.2V or 24.4V recommended for most users in general driving conditions.


Reverse connect protection

Short circuit protection

Overload protection

Overtemperature protection (protection circuit over 130℃, return to normal when it drops to 90℃).

Total Cable Length: 3.5 Meters (input 0.8 meter, output 2.7 meters)

Output Connector: Micro-USB plug, DC 5V, 2.5A

Working temperature: -20℃ to 90℃

Hard-wire kits, there are 3 wires that need to be connected:


A RED wire (BAT+), needs to connect with constant fuse, which can provide power to dash cam even when the vehicle is off.

A YELLOW wire (ACC), needs to connect with Fuse Box ACC, which can make the dash cam auto power on&off when the vehicle is on&off.

A BLACK wire (GND), needs to connect with metal bolt or screw, which can prevent electric shock.

NOTE: The Parking Mode only works on dash cam that have the function of detecting ACC, this will make your camera record based on your camera’s parking mode setting.


-Always refer to the vehicle owner’s manual to avoid fuse slots that could pertain to important safety features within your vehicle. For example, avoid fuses that controls airbags, stability control programs, etc.


-Fuses that control certain elements such as the radio, garage door opener, sunroof, etc. are usually safe to use.


-For M550 dash cam is built in Super Capacitor. No power pack or batteries. It must be powered by connecting to your car in one of three ways direct connect to a fuse, cigarette light adapter or a OBD cable. So if you want to use parking mode you need to purchase hard-wiring kit with 3 wires, the output current need reach 5V/2.5A.

Steps:

1.Please connect the red wire to always powered, the yellow wire to ACC, and the black wire to ground.

2.If the hardwire kit is connected correct, find the "Park" menu in the menu, press OK to select connected, tick parking monitoring, and press the menu button to exit and save the settings

3.Once the car turns on ACC, for M63 dash cam will automatically turn on, and once the car turns off, the camera will enterTime-Lapse Parking Mode / Motion Detection Parking Mod / Collision Detection Parking Mode automatically when hardwire the camera correct.

Package List:

1x Hardwire Kit （Only suitable for Micro-USB Port ）