Manufacturer: FMA
Material: fireproof ABS EPS foam inner cushion
Weight: 740g
Color: black / gray / red / yellow / blue / orange / white
Contents: helmet hair surface Velcro (set) reflective stickers (set) inner cushion cotton (thick and thin set)
Size: recommended use of head circumference within 61CM
Description: FMA SAR series helmet shell by fire ABS material, fire abs, high mobility resistance, high processing, high strength, quality assurance, good product quality, good service, welcome to call for advice, quality assurance, high impact strength, the Chemical resistance, flame retardant material environmental protection. The "inner layer" eps are polystyrene foam. This substance is made of polystyrene resin as raw material, in the process of making the foaming agent as an auxiliary reagent, and then use high temperature heating and the formation of plastic foam, this foam is more unique rigid closed-cell structure. It is a unique rigid closed-cell structure.
s chemical structure is more solid, is durable characteristics." The inner layer and the common skateboard helmet are a layer of about 2cm thickness of EPS hard foam as a buffer layer, followed by a sponge liner. The protection area is large, with strong impact resistance. Provide a thin and thick two sets of sponge liner, where the thick one
Set of pre-installed on the helmet, thin set of separate sub-assembly. The liner is for washing and replacement, and the inner polyester sponge is suitable for replacement by different helmet people. The twist lacing system has the following major features.
1、No pressure point. Due to the use of unique lengthened lacing guide groove and precision closure, eliminating pressure points.
2, adjust the tightness at any time. The wearer can fine-tune the tension, each time immediately to the best fit BOA technology can replace the traditional lacing degree. It is not possible to perform such in-use adjustments using ordinary straps.
3, reliable closure, will not loosen. If the band stretches itself throughout use, it can quickly rotate the knob half a turn and pull it tight again. No pressure points, adjust the tightness at any time. Guide rail center hole location is the same as Wendy's other helmets, with the option of the original gray cover, MOE rail strip, quick release headset buckle or Princeton MPLS adapter. The windshield lens is locked with 5*12 hexagonal screws and a separate hole is provided for mounting the clear goggle assembly.
Can be used with EX helmet special bracket Comtac headset buckle
|
Brand
|
FMA
|
|
Product name
|
Tactical helmets
|
|
Material
|
Anti fire ABS EPSfoam inner cushion
|
|
Model
|
TB1452
|
|
Weight
|
740g
|
|
Colour
|
Black/Grey/red/yellow/blue/orange/white
|
|
Size
|
30*16.5*23.5
|
|
Head circumference
|
Suggest using a head circumference within 61CM
|
