Features:   
- 2oz copper & 4-layers PCB.   
- ESC & Battery solder tabs in pairs   
- Solder Bridges of various voltage for Camera & VTX.   
- DC/DC synchronous buck regulator, Efficiency is up to 95%.   
- TVS(Transient Voltage Suppressor) protection for DC/DC chip.   
- 5V & 12V Output LED indicators & Short circuit tolerant   
Specification:   
General:   
- Input voltage range (2S-6S operation): 7.2 - 26VDC   
- Regulated 5V and 12V outputs   
- LED power indicators ( 5V & 12V outputs )   
- 4 ESC outputs   
ESC outputs:   
- Continuous current: 20A per output   
- Peak current (10 seconds/minute): 30A per output   
BEC 5V output:   
- Designed for RC Receivers, Flight controllers, OSD, and Servos.   
- Voltage: 5.0 +/- 0.1VDC   
- Continuous current: 3 Amps   
- Short-circuit tolerant (10 seconds/minute)   
- LED (indicates voltage is in regulation, within 10%)   
BEC 12V output:   
- The battery should be 4S~6S LiPo   
- Standard output designed to power cameras and video transmitters,etc.   
- Voltage: 12.0 +/- 0.2VDC   
- Continuous current: 2 Amps (Max.3A 10s/minute)   
- Short-circuit tolerant (10 seconds/minute)   
- LED (indicates voltage is in regulation, within 10%)   
CAM & VTX voltage bridge   
- 3S operation. choose VCC for 12V camera & 12V VTX, VCC=Battery Voltage.   
- 4~6S operation, choose 12 for 12V camera & 12V VTX   
- 3~6S operation, choose 5 for 5V camera   
- Video pass through from the CAM pad to the VTX pad   
Physical:   
- Dimensions: 36 x 36mm   
- Weight: 6g   
- Mounting holes 30.5mm square spacing   
Package including :   

1 x  Power Distribution Board PDB