Features:
* Brand new and high quality
* Made of high-quality materials, heat-treated beryllium copper plunger, gold-plated phosphor bronze bar rel and gold-plated stainless steel wire spring, good contact and durable.
* Essential component for PCB conductive testing to access components on printed circuit assemblies and test stability and durability.
* Widely used for testing through-hole components, gold finger (edge connector) PCB and pads.

Specification:
Model (optional): P50-B1, 75-B1, P100-B, P100-Q2, P125-H, R75-3S, 100-4W, R125-4S, GP-2
Material:
Needle tube: gold-plated brass tube
Spring: stainless steel wire
Casing: Brass tube gold plated
Quantity: 100pcs

Model: P50-B1 probe 0.68mm
Rated current: 3A
Contact resistance: 50mΩ
Probe tube diameter: 0.68mm
Probe diameter: 0.5mm
Drilling size: 0.9mm
Minimum test distance: 1.27mm

Model: 75-B1 probe 1.0mm
Rated current: 3A
Contact resistance: 50mΩ
Probe tube diameter: 1.0mm
Probe diameter: 0.68mm
Probe length: 16.4mm
Drilling size: 1.3-1.35mm
Minimum test distance: 1.91mm

Model: P100-B probe 1.36mm
Rated current: 3A
Contact resistance: 50mΩ
Probe tube diameter: 1.36mm
Probe diameter: 1.5mm
Probe length: 33.3mm
Drilling size: 1.7mm
Minimum test distance: 2.54mm

Model: P100-Q2 probe 1.36mm
Rated current: 3A
Contact resistance: 50mΩ
Probe tube diameter: 1.36mm
Probe diameter: 1.5mm
Probe length: 33.3mm
Drilling size: 1.7mm
Minimum test distance: 2.54mm

Model: P125-H probe 2.0mm
Rated current: 5A
Contact resistance: 50mΩ
Probe tube diameter: 2.0mm
Probe diameter: 2.5mm
Probe length: 33.3 mm
Drilling size: 2.4mm
Minimum test distance: 3.18mm

Model: R75-3S probe cover, suitable for 1.0mm 75-B1 probe
Rated current: 3A
Contact resistance: 50mΩ
Probe sleeve diameter: 1.32mm
Total length: 17.2mm
Needle sleeve drilling size: 1.3-1.35mm
Can be equipped with various head-type probes of the P75 series.

Model: R100-4W probe sleeve, suitable for 1.36mm P100-B/Q2 probe
Rated current: 3A
Contact resistance: 50mΩ
Probe sleeve diameter: 1.67mm
Overall length: 38.3mm
Probe sleeve drilling size: 1.7mm
Can be equipped with P100 series various head probes.

Model: R125-4S probe cover, suitable for 2.0mm P125-H probe
Rated current: 5A
Contact resistance: 50mΩ
Length: 30mm
Diameter: 2.36mm
Drilling size: 2.4mm
Can be equipped with various head-type probes of the P125 series.

Model: GP-2 test needle umbrella cone head positioning column probe
Drilling installation size: 5.0mm; Total length: 44mm;
Stroke: 10.5mm Head height: 7.5mm

Package Included:
100 x test probes

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.