Signal stability, fast reaction and wide range of applications

Easy to use, the 4 channel remote control system to set up anti-theft / a key to revoke anti-theft, help you take control of your gadgets, car, home and garage

Clone up to 4 remote signals from 4 different remotes

A fixed frequency remote cloner (433 mhz) for copying 99.99% common fixed and learning code remote controls

Ideal used for Cars, Garage Doors, Gate Doors, Car sunroofs, Car/Motorbike alarms, Home security products, short-range wireless remote control products, Electrical appliances/Home automation i.e. lights, industrial control products, etc

 

Specifications:

Operating frequency:433MH

Weight: 30g

Size: 55 x 33 x 15 mm

Remote control range: Up to 50 meter

Battery: 12V/23A (including)

With this replacement remote key you can clone all 433MHz fixed code key fobs based on supported IC

Supported IC CODE: 2260 (ex, PT2260, SC2260, HS2260 LX2260, HX2260, etc); 2262 (ex, PT2262, SC2262, LX2262, HS2262, HX2262, etc), PT2264, PT2240 (LX2240 LX2241 SCL2240), CS5211, 1527 (EV1527, HS1527, HX1527 SC1527 GP1527 CP1527 AD1527 SCL1527 TL1527 ZX1527), SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630. The Codes that have the same suffix like SC2262 and PT2262 are also supported

 

 

Note:

It can't copy two-way remote control and rolling code remote control (Rolling code chips start with HCS commonly, such as HCS200, HCS201, HCS300, HCS301, etc.)

NOTICE: We strongly suggest you to check the IC CODE of your original remote key. The replacement remote key may not work properly if you copy the code from an unsupported IC.

 

 

How to Program:

1. Press the "A" key and the "B" key at the same time, the LED indicator flashes three times, release the pressed "B" key, the "A" key is not released, and click the released "B" key three times, The LED indicator enters a fast flashing state. At this time, all the data in the memory is cleared. After the data is cleared, the remote control will not light up no matter which button is pressed.

2. Hold the original remote control in one hand, and the copy remote control in the other. Keep the two remote controllers as close as possible. Press the buttons for copying. The LED indicator flashes three times and then flashes quickly. The copy is successful. Other buttons The operation method is the same. Some remote controllers have low transmitting power, so the original remote control and the copy remote control should be operated back-to-back for duplication. If there is interference in some operating environments, you should avoid the interference operation. If the copy is not easy to use, copy the copy again after clearing the code. (Especially important: the remote control in your hand must be able to work normally and have the same frequency as our remote control)

   

 

Package Includes:

4 x Replacement Cloning Electric Remote Control Key 433MHZ