Description

Features:

X-ray Unit A1
Description
PRODUCT DESCRIPTION
0.8mm focus to get high definition images- High-voltage generator with 0.8mm focus, high-definition imaging, enjoy top quality- High frequency DC technology
Ultra-low radiation, the exposure dose is reduced by more than 30%
compared with the standard generator, maximizing effective rays and
greatly reducing the radiation intensity
 
Parameters:
Tube kV: 70kV
Tube mA: 5mA
Focus: 0.4mm
IDV Frequency: 400kHz
Anode angle: 12°
Exposure time: 10ms-2000ms
Full charge exposure shots: 500

PACKING
LISTMain bady*1
Shoulder strap*1
User manual*1
Hand strap*1
Short ray cartridgeAdapter*1
X-ray Unit H2
Product Basic Information
Product Name：Dental X-ray System
Working principle：The high voltage generator provides high voltage to both ends of the X-ray
tube filament and metal target in the internal X-ray source assembly, a large number of electrons are
generated on the cathode filament of the X-ray tube and move at a high speed in the vacuum tube,
impact the metal target to generate the X-ray. The X-ray penetrate the different tissue densities of the   body, such as teeth and muscles after pass through the X-ray window and beam tube, the X-ray which
carry image information through body tissue, are passed through image receiving devices such as
phosphor sheets, film or digital image receivers, to show different densities of human tissue images.
Application Range: used for the teeth to taking an X-ray photography, with an intraoral image
receiver, images are obtained for the clinical diagnosis.
Structural composition: the product consists of the host (including the X-ray tube, controller and
rechargeable battery), beam limiting tube, power adapter, stand and exposure switch.
 
Product Description
1.Power Adapter Input Voltage Uniphase AC 100 ～240V，±10%
                Supply Frequency 50/60Hz，±1Hz
Input Power 286W
2.Output Power 25.2W
3.Charge voltage DC 25.2V
4.Charge current 1.0A
5.Nominal value of the focal point 0.8mm
6.Anode angle 19º
7.Available maximum tube voltage at 2mA 60kV
8.Maximum output electric power 0.12kW
9.Maximum loading factor combination 60kV 、2mA 、2s
10.Repeatability of radiation output No more than 0.5
11.Tube voltage (The deviation is within the range of ±10%) 60kV
12.Tube current (The deviation is within the range of ±20%) 2mA
13.Running mode Discontinuous operation, maximum
excitation (open) time : minimum
excitation (close) time = 1：30
14.Total filtration of X-ray tube assembly >2.5mm Al
15.Intrinsic filtration of X-ray tube assembly 0.75mm Al
16.Additional filtration 1.00mm Al
17.Half-value layer ≥1.5mm Al（60kV）
18.Leakage radiation ≤0.25mGy/h（60kV 、2mA 、2s）
19.Adjustment range of the loading time 0.01 ～2.00s，adjustable
20.Distance of the Focal point to skin (The deviation is within 0~5%) 211mm±3mm
21.X-ray field size at the end of beam limiting tube round ，Φ 56mm±3mm
22.Nominal electric power 0.12kW（60kV 、2mA 、0.1s）
23.Available maximum tube current at 60kV 2mA
24.Inverter frequency of the high voltage generator 70kHz
Note: the loading time adjustment range meets the R10 series for the adjustment.
 
Product basic safety features
(1) Safety category：Class Ⅱ or internal power supply class ，does not work while charging.
(2) Classified by electric shock protection type：Type B application section.
(3) Classified by the degree of protection against fluid intake：Common equipment.
(4) Classified  by the manufacturer's recommended disinfection and sterilization methods：As required by the manufacturer to carry out.
(5) Classified by the degree of safety for use with flammable anesthetic gases mixed with air or with oxygen or nitrous oxide：NonAP/APG type.
(6) Classified by operation mode：Discontinuous operation，Maximum excitation (open) time： Minimum excitation (close) time =1：30.
(7) The product has no application part with protection against defibrillation discharge effect.
(8) Whether the equipment has a signal output or input part：No.
(9) The product is a common equipment.
(10) Permanent or non-permanent installation equipment：Non-permanent installation equipment.
(11) Radiation type：Ionizing radiation.
(12) Radiation property：X ray.
(13) Radiation distribution：The X-ray radiates from the positive direction of 6cm circle in the window of the limited beam barrel when used.
 
X-ray tube technical specification
1.The X-ray tube model XD10D-0.5 / 70
2.Nominal value of the focal point 0.8mm
3.Target material Tungsten
4.Maximum working tube voltage 70kV
5.Anode angle of the X-ray tube 19º
6.Intrinsic filtration 0.75 mm Al
7.Filament current 2.0 A
8.Filament voltage 2.85 ± 0.5 V
X-ray Sensor R1
Sensor Size: 0.8
Features：
The product is mainly composed of a sensor, an adaptor, a USB connection cable and workstation software. Working together with an X-ray equipment, the Product is intended to make X-ray radiography in dental clinics or veterinary clinics，Sensor size Suitable for child（adult single tooth）and pets.
 
Hardware Requirements：
Central Processor: Intel Core i3 or higher
Internal Memory: 4GB or higher
Hard Disk: 80GB or higher
Display: 1280X1024
USB interface: two
Keyboard: One
Mouse: One
 
Software Requirement
Operating Software：Windows 7 SP1,8,10 32/64bit
Runtime: .Net Framework 4.6 or higher, VC++ 2015
 
Specification：
Product Name: Image RVG x-ray Sensor
Operating Voltage:5VDC
Input power：500mW
Spatial Resolution：≥7Lp/mm
Low contrast resolution ：Able to display holes with 1mm, 1.5mm, 2mm and
2.5mm diameter on the 0.5mm-thick aluminium foil
Image uniformity ≤2%
Effective image area： 21*2120.16mm
Sensor Size：26.5mm×32mm×6mm
Adaptor Size：113.66mm×40mm×15.8mm
Total Cable Length: 3 m (sensor cable + control box cable to PC)
Warranty:1 Year
 
Accessory :
Digital sensor: 1 Set
USB cable :1 PCS
U Disk: 1PCS
Disposable protective sheath: 1 Box（500）
silicon loop: 1 PCS
Sensor holder: 1 PCS
Aluminum plate:1 PCS (40*40*6mm)
X-ray Sensor R2
Sensor Size: 1.5
Features：
The product is mainly composed of a sensor, an adaptor, a USB connection cable and workstation software. Working together with an X-ray equipment, the Product is intended to make X-ray radiography in dental clinics or veterinary clinics，Sensor size Suitable for adult and child.
 
Hardware Requirements：
Central Processor: Intel Core i3 or higher
Internal Memory: 4GB or higher
Hard Disk: 80GB or higher
Display: 1280X1024
USB interface: two
Keyboard: One
Mouse: One
 
Software Requirement
Operating Software：Windows 7 SP1,8,10 32/64bit
Runtime: .Net Framework 4.6 or higher, VC++ 2015
 
Specification：
Product Name: Image RVG x-ray Sensor
Operating Voltage:5VDC
Input power：500mW
Spatial Resolution：≥7Lp/mm
Low contrast resolution ：Able to display holes with 1mm, 1.5mm, 2mm and
2.5mm diameter on the 0.5mm-thick aluminium foil
Image uniformity ≤2%
Effective image area：30*25mm
Sensor Size：38.4mm×31.5mm×6mm
Adaptor Size：113.66mm×40mm×15.8mm
Total Cable Length: 3 m (sensor cable + control box cable to PC)
Warranty:1 Year
 
Accessory :
Digital sensor: 1 Set
U Disk: 1PCS
Sensor holder: 1 PCS
Sensor locator Holder ：1 Set
Aluminum plate:1 PCS (40*40*6mm)

FDA Statement   

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.

If so, you can bid on this item only if you are an authorized purchaser.

If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

FDA for Curing Light: 510(K) Number: K192233,  Regulation Number: 21 CFR 872.6070,  Product Code: EBZ
FDA for Handpiece: 510(K) Number: K181691, Regulation Number: 872.4200, Classification Product Code: EFB, Subsequent Product Code: EGS

FDA for Scaler: 510(K) Number: K163414, Regulation Number: 872.4850, Product Code: ELC

Feedback

IMPORTANT INFORMATION ON OUR POLICY AND FEEDBACK

  1. Please leave me FIVE STAR POSITIVE feedback if you are satisfied with our items.
    2.  
  2. We try to be fair and accurate with all of our product listings and descriptions. Please read each auction, bid, and sale carefully.
  3. We will appreciate it if you please email us before leaving negative feedback. If there is a problem, we can work together to resolve it.
    We strive to always be extremely fair and always try to work with reasonable customers.
  4. Negative feedback doesn't go away and should only be left as a last resort! We strive for positive feedback, harmonious relations and even friendships.
    We will always make every attempt possible to resolve issues if we made a mistake.(It happens). Please do not assume a mistake is intentional.
    Let us know if our service could be better!!

Shipping

  1. International Shipping to worldwide.
  2. Handling within 24 business hours.
  3. Tracking info of your parcel is available.
  4. Returns could be accepted within 30 days after receipt of the item.
  5. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
  6. It usually takes 15-45 business days to arrive by economy international shipping and 7-12 business days by express. The following form is for your reference.

Payment

We accept PayPal payment, it is easy and safe. Payment should be sent within 7 (SEVEN) days of auction closing. All winning bidders whom won our item, please let me know your contact number after you made the full payment , we need this number to make sure you can receive your item in time, and also for emergency contact consideration.

 

Returns

  1. Returns could be accepted within 30 days after receipt of the item.

  2. Terms of Sale:
    Refund or replacement request is available only the requests within 1 week after parcel received & returning the item as the same condition as received. Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable. If the item is found non-defective, the item will be sent back to the buyer at buyer's expense. Items returned without RMA number will be refused and returned to the sender. Buyer is responsible for All Return Postage and Shipping Charges. Buyer is responsible for additional shipping costs for items that are returned refused and / or undeliverable. We do not accept any returns without an authorization number on the box or label it is being returned.

Contact us

We will reply all messages within 24 business hours and we are able to give you a quick response during the duty time. If we are off duty, please kindly be patient and give us a little more time, not just leave the neutral or negative feedback without communication. Every problem will be solved ASAP if you contact us!

Company name: Dreamland Technology Ltd
City, State: Beijing, China
Telephone number: 0371-56645662

Our working time
Monday To Friday:
9:00 am --- 12:00am
1:30pm ---6:00pm
(Please Refer to Beijing Time.)

Copyright©jinlan226 Dental Store,All rights reserved

DataCaciques